Your supply and treatment goal matter more than a suburb average. This guide narrows options; final suitability depends on the actual property and water testing.
There's a water sample in our records from New Beith (2025, mains water). That's a different property, not a test of your Harvest Rise supply. We'd want to know where your water comes from and what you're trying to treat before using any readings to choose a filter.
If the filter will be outdoors at your Harvest Rise property, we'll check whether the housing, mounting and pipework are suitable for that spot. Weather protection, water pressure, isolation valves and space for cartridge changes all need to be considered.
Measurements relate to the named properties and stages only. They do not establish an average or prove water is safe to drink.
Looking at water filtration for your Harvest Rise home? We install whole-home filters, kitchen drinking-water systems and reverse osmosis. See some of our recent work around Logan, along with feedback from JR customers.
These numbers count installation jobs. Some homes had more than one filter fitted.
We've completed 28 water filter installations around Logan. You can see some of our nearby work below.
Before choosing a system, we'll look at where your water comes from, the pipework, water pressure and how much flow your household needs. Rainwater and bore supplies can need extra testing and treatment, especially for drinking. See what customers say about JR.
Here's where we've worked and what each job involved.
A Greenbank customer booked us in September 2026 for a Puretec RO270 reverse-osmosis system. This was for reverse-osmosis drinking water at the kitchen outlet, not the whole house. Alongside the RO270, the notes mention a filter tap and a separate filter. We also went through operation and maintenance with the customer. The job notes do not give a separate commissioning test result.
Back in October 2026, our team was in Boronia Heights for a Puretec Z6 drinking-water filter. The work focused on the drinking-water outlet, rather than filtering the entire property. We installed the Puretec Z6 as the kitchen filter. The notes mention extra work around the inlet valve and flexible connector, including a loose nut that needed attention.
Easy to get a quote, well priced and quick service. I would definitely use again. Excellent
Had initial gas connection fitting for new gas heater installed at new home build. All good, good job.
Jr gas and water were amazing to deal with from start to finish, will definitely be using their services for future Renoβs, canβt fault these guys at all.
Here's some of the water filtration work our team has completed around Logan. You'll find the suburb and job details with each project.
A Greenbank customer booked us in September 2026 for a Puretec RO270 reverse-osmosis system. This was for reverse-osmosis drinking water at the kitchen outlet, not the whole house. Alongside the RO270, the notes mention a filter tap and a separate filter. We also went through operation and maintenance with the customer. The job notes do not give a separate commissioning test result.
Back in October 2026, our team was in Boronia Heights for a Puretec Z6 drinking-water filter. The work focused on the drinking-water outlet, rather than filtering the entire property. We installed the Puretec Z6 as the kitchen filter. The notes mention extra work around the inlet valve and flexible connector, including a loose nut that needed attention.
A Yarrabilba customer booked us in September 2026 for the customer's own whole-home filter. The owner already had the whole-house filter on site, and our crew installed it. This was booked alongside drainage work; the notes show the deeper stormwater pit needed a separate follow-up, not the filter.
If you're on acreage in Harvest Rise, the big question is whether the house uses mains water, a rainwater tank, bore water or a combination. For tank or pump-fed water, we also check pressure, sediment and whether separate treatment is needed for drinking water.
In Harvest Rise, some of the property types include new estate homes, modern family houses and acreage-edge residential blocks. Not every place has the same water source. One home might use mains, while the next uses tank water or a pump. We'd check which supply feeds your taps first.
Before we recommend anything for Harvest Rise, we'd ask what you want the filter to do. Sediment, taste and specific contaminants aren't all dealt with by the same cartridge, so the water source matters.
There's a water sample in our records from New Beith (2025, mains water). That's a different property, not a test of your Harvest Rise supply. We'd want to know where your water comes from and what you're trying to treat before using any readings to choose a filter.
If the filter will be outdoors at your Harvest Rise property, we'll check whether the housing, mounting and pipework are suitable for that spot. Weather protection, water pressure, isolation valves and space for cartridge changes all need to be considered.
For whole-home filtration in Harvest Rise, we'd check how the tank or pump delivers water, peak flow, sediment and where the filter can be mounted. If the supply isn't treated mains water, testing may show that extra stages are needed. We also plan for bypass and cartridge changes.
Only want to filter the kitchen tap? We can look at an under-sink system without treating every shower and laundry tap. We just need room for the filter, a suitable cold-water connection and space for servicing.
Reverse osmosis can be useful for a specific drinking-water concern, but it needs the right feed pressure, a drain for reject water and room for the membranes and filter changes. With a tank or pump supply, we may also need pretreatment and extra pressure checks.
If you're using rainwater, bore water or a mix of supplies, we'd want to understand the source and whether drinking-water testing is needed. A carbon cartridge on its own doesn't make untreated water safe. Depending on the results, sediment filtration, UV or another suitable treatment might be needed.
Here are some individual-property test results we have on file for comparison. None of these is a water test from your Harvest Rise address.
New Beith (2025; mains water; pre-filter) β pH 7.67; hardness 51 mg/L; TDS 123.78 mg/L; turbidity 0.02 NTU.
Cedar Vale (2025; mains water; filtration stage not specified) β pH 8.25; hardness 45 mg/L; TDS 139 mg/L; turbidity 0.02 NTU.
Kingston (2025; mains water; filtration stage not specified) β pH 8.31; hardness 115 mg/L; TDS 290 mg/L; turbidity 0.02 NTU.
The numbers belong to the properties and treatment stages named above. A post-filter result is treated water, not a reading from the raw supply. We'd test or check the water at your own Harvest Rise property before making a recommendation; these figures alone don't prove water is safe to drink.
Two homes in the same area can have different water. These results come from individual properties and might not reflect what comes out of your tap. We recommend testing your own supply before deciding on treatment.
For tank- or bore-fed homes, we'd start with the water source and any testing, not a particular model. Whole-home filtration is an option when you want water treated at multiple taps. Under-sink filtration keeps the job to the kitchen, while reverse osmosis is worth discussing for a specific drinking-water need. We can check your actual supply before giving you a firm recommendation.
The best filter depends on where your water comes from. Here's what JR has recorded at some mains-water properties in Logan, and what to look at if your home uses rainwater.
These figures come from 8 mains-water samples JR recorded in 2025. They show the median (middle) reading from those tests. The samples were taken before filtration or had no confirmed filtration stage. They don't represent every home in the area or establish that water is safe to drink.
Hardness and dissolved solids weren't the same at each home. If you're using rainwater, or switch between town water and a tank, each supply needs its own check.
Across the tested properties, hardness ranged from 45 to 145 mg/L, dissolved solids from 104 to 337 mg/L, and turbidity from 0.02 to 0.02 NTU. These are readings from individual properties, not a test of the whole water network.
* Hardness figures use the units recorded in JR's test sheets; check the test method and units before comparing them with a filter specification. These aren't readings from the water supplier's monitoring program. A result of 0.02 NTU doesn't mean there's no turbidity. None of these figures describes rainwater, bore water or a private supply, and the four measurements can't tell you whether chlorine, PFAS, germs or other contaminants are present. They aren't a drinking-water safety test.
Tank water needs its own check. Roof and gutter condition, first-flush setup, animals, tank maintenance, how long the water sits and what you use it for can all make a difference. The mains-water readings above don't apply to rainwater tanks. Treatment needs to suit the water in your tank and how you plan to use it.
Check the roof and gutters, leaf screens, first-flush diverter, tank lid and overflow protection. Keeping dirt and animals out of the tank is just as important as the filter itself.
If you drink or cook with tank water, have the microbial risks assessed and arrange suitable testing. Depending on the property, you may also need to check sediment, acidity, metals, chemicals or an unusual colour or smell.
A sediment filter can help stop particles reaching taps and other equipment. Carbon or other filter media may help with particular problems, but a cartridge filter by itself isn't a substitute for disinfection.
If the water will be used for drinking, check whether a properly sized and maintained UV or another suitable disinfection system is needed. UV relies on clear enough water and a reliable power supply, and it won't remove dissolved chemicals.
Tell us whether you're using town water, rainwater or both, and what you'd like to improve. We can check flow, space and plumbing requirements to help you choose a suitable system.
Answers about water-filter suitability, installation work and water testing for properties in and around Harvest Rise.
Usually we'd look at the main water entry or the kitchen cold-water line, depending on what you want filtered. At a Harvest Rise property using tanks or a pump, we'd also check the water source, pressure and whether there's room to service the filters.
Not in Harvest Rise itself, based on the completed jobs in our current records. We have 28 installations across Logan, including Puretec RO270 in Greenbank. We list that job under its real suburb rather than claiming it happened here.
No. The example we've shown was taken at a property in New Beith in 2025, not at your Harvest Rise address. It's useful for context, but we'd check or test your own water before using any readings to choose treatment.
Any nearby water-test readings relate to the sampled property, not every home in the suburb. Filter selection and installation requirements should be confirmed for your actual water source and plumbing.
Want better-tasting drinking water or a filter for the whole house? Compare your options, see the prices and check what installation involves before you book.
28 recent water filter installations across Logan
Compare whole-home, kitchen and drinking-water options.
See the price and what's involved for your property.
See the booking options available for your address.
On rainwater or bore water? Testing may be needed before choosing a filter for drinking water. We'll check the setup before confirming the installation.
