Puretec WH1-30 | $749 Installed

PURETEC SINGLE-STAGE WHOLE-HOUSE FILTRATION

Puretec WH1-30 Installation Brisbane & Gold Coast

JR Gas & Water supplies and professionally installs the Puretec WH1-30 whole-house water filter across eligible Brisbane and Gold Coast properties. It is Puretec's compact single-stage mains-water filtration option for customers wanting whole-property carbon treatment without the additional sediment housing used by the WH2 range.

The current WH1-30-LF uses one Puretec CB10MP1 10-micron MaxiPlus™ bonded activated-carbon cartridge. Puretec lists the system for reduction of chlorine, unwanted taste and odour, chemicals and sediment while providing a published maximum flow rate of 30 litres per minute.

The WH1-30 requires no electricity and has no moving treatment parts. Its single-housing format reduces wall space and cartridge count compared with a twin-stage filter, but it also means there is no separate dedicated sediment pre-filter ahead of the carbon cartridge.

Puretec WH1-30 at a glance: this is a single-stage 10-inch whole-house mains-water filter using one CB10MP1 10-micron bonded carbon cartridge. Puretec publishes a 30 L/min maximum flow, 1-inch BSP connection, 520 kPa current model maximum pressure and a 10-year system warranty. It targets chlorine, taste, odour, chemicals and sediment, but does not include the separate PX05MP1 sediment stage found in the WH2-30.

Puretec WH1-30 Supply & Installation at a Glance

Filtration Single Stage

Maximum Flow 30 L/min

Cartridge CB10MP1

Power Required No

Who Is the Puretec WH1-30 Best For?

Mains-Water Homes

Puretec designs the WH1 platform for treated mains and town-water supplies where general-purpose whole-house carbon filtration is wanted.

Small to Medium Residences

Puretec currently categorises the WH1-30 as suited to small-to-medium residences, subject to actual household peak flow and plumbing conditions.

Customers Wanting a Simpler Filter

The single-housing layout can suit customers who want chlorine, taste and odour treatment throughout the property without maintaining a separate sediment cartridge.

PRODUCT SUITABILITY

Is the Puretec WH1-30 Right for My Property?

A Good Choice If...

Your property uses treated mains or town water.
You want filtration across applicable household outlets.
Chlorine, taste and odour are key treatment priorities.
Your required filtered-water flow suits a 30 L/min system.
You prefer a simple one-cartridge service arrangement.
You want filtration without an electrical supply.

Consider Another Option If...

Your incoming water carries significant sediment.
You specifically want a separate sediment pre-filter.
Your household demand requires more than 30 L/min.
You want conventional hardness removal.
You require UV treatment for microbiological risk.
You want reverse-osmosis or dissolved-solids reduction.

JR Should Check First If...

Your incoming pressure exceeds 500 kPa.
Your peak household flow is uncertain.
The proposed mounting location is exposed to strong sunlight.
The wall or structure may not support the housing securely.
You are replacing a twin-stage or different-brand filter.
Your source water is rainwater, bore water or otherwise untreated.

WH1-30 is single stage. The CB10MP1 itself can reduce sediment as well as chlorine, taste and odour, but there is no separate PX05MP1 sediment cartridge ahead of it. If dedicated sediment pre-filtration is important, compare the WH2-30 instead.

How Does the Puretec WH1-30 Work?

The WH1-30 directs the incoming mains-water supply through one large 4.5-inch × 10-inch CB10MP1 carbon block before the filtered water continues through the applicable household plumbing.

1

CB10MP1 Carbon Block Filtration

The CB10MP1 is a bonded activated-carbon cartridge with a nominal 10-micron rating. Puretec lists it for reduction of chlorine, unwanted taste, odour and sediment. Its bonded construction is also designed to avoid release of loose carbon fines.

Because there is only one treatment housing, all standard filtration is handled by this single cartridge. This keeps servicing simple, but the carbon cartridge receives the full incoming particulate load rather than being protected by a dedicated first-stage sediment filter.

What Does the Puretec WH1-30 Reduce?

Puretec's current WH1-30 information lists chlorine, unwanted taste and odour, chemicals and sediment among the system's treatment functions.

Chlorine

The CB10MP1 carbon block is designed to reduce chlorine in treated mains water, subject to cartridge condition, water quality and flow.

Taste & Odour

Activated carbon targets compounds responsible for unwanted taste and odour throughout the filtered mains-water supply.

Sediment & General Chemical Treatment

Puretec lists sediment and chemicals among the WH1-30 treatment functions, with the CB10MP1 providing filtration through its bonded 10-micron carbon structure.

No specific PFAS claim is being made here. Puretec's current WH1-30 product page lists “chemicals” generally but does not specifically name PFAS for this model. Where PFAS reduction is a primary purchase requirement, choose a product with explicit current manufacturer documentation for that target.

Key Features of the Puretec WH1-30

Single 10-Inch Housing

The WH1-30 uses one MaxiPlus™ 4.5-inch × 10-inch housing and cartridge, making it physically smaller and simpler than twin-stage whole-house systems.

30 L/min Maximum Flow

Puretec publishes a maximum flow rate of 30 litres per minute for the current WH1-30-LF.

CB10MP1 Carbon Block

The genuine replacement cartridge is Puretec's 10-micron CB10MP1 bonded activated-carbon block, also published at up to 30 L/min.

Rust-Proof Anti-Flex Bracket

The current WH1-30 uses Puretec's integrated rust-proof anti-flex aluminium wall-mount bracket.

No Electricity Required

The standard filter has no powered pump, UV lamp, electronic valve or controller.

10-Year System Warranty

Puretec currently provides one year parts and labour plus nine years parts only on the system. The replaceable cartridge is a consumable and is excluded.

Puretec WH1-30 Specifications

Specification	Detail
Brand	Puretec
Current Model	WH1-30-LF
Application	Whole-house treated mains / town-water filtration
Puretec Residence Category	Small to medium
Filtration Stages	1
Standard Cartridge	CB10MP1 bonded activated-carbon block
Cartridge Size	MaxiPlus™ 4.5" × 10"
Micron Rating	10 micron nominal
Maximum Flow Rate	30 L/min
Current Model Maximum Pressure	520 kPa
Pressure Control	Approved pressure-limiting device required where line pressure exceeds 500 kPa
Maximum Water Temperature	52°C; cold-water installation and freeze protection required
Connection	1" BSP / 25 mm
Published Dimensions	Approx. 337 mm H × 181 mm W × 209 mm D
Rear Mounting Hole Spacing	Approx. 150 mm
Minimum Under-Bowl Clearance	50 mm minimum according to Puretec installation guidance, with additional practical working space recommended
Separate Sediment Pre-Filter	No
Power Requirement	None
UV Treatment	No
Reverse Osmosis	No
Water Softening	No conventional ion-exchange softening stage
WaterMark	Puretec's WH-series documentation identifies AS 3497 WaterMark certification under Licence No. WM 74617
NSF/ANSI	JR currently displays “NSF/ANSI Certified: Yes”; the Puretec manufacturer material reviewed does not identify the specific complete-system NSF/ANSI certification basis, so a specific standard should be verified before being published
Manufacturer Warranty	10 years: 1 year parts and labour plus 9 years parts only; cartridge excluded
Replacement Cartridge	CB10MP1
Cartridge Service Guide	Generally 6–12 months depending on water quality and usage; Puretec recommends approximately six-month replacement to maintain optimum water quality
JR Lifetime Warranty	Eligible where applicable JR installation and warranty conditions are met

Pressure documentation: older WH-series technical material lists a broader pressure range, but Puretec's current WH1-30-LF product page specifies 520 kPa maximum pressure. The current installation guide separately requires pressure limiting above 500 kPa, so installation should follow current model requirements.

INSTALLATION REQUIREMENTS

What Is Required to Install the Puretec WH1-30?

Suitable treated mains-water point-of-entry connection
Solid mounting surface for the single filter bracket
Space for the approximately 337 × 181 × 209 mm housing
At least 50 mm under-bowl cartridge clearance
Accessible isolation before the filtration system
Appropriate point-of-entry backflow prevention
Pressure limiting where incoming pressure exceeds 500 kPa
Protection from water hammer
Cold-water installation
Protection from freezing
Location away from strong direct sunlight
Accessible pipework for future servicing
Leak-management planning where leakage could damage property
Qualified licensed plumbing installation

Pressure control is part of product protection. Puretec requires an approved pressure-limiting device where line pressure exceeds 500 kPa and warns that the housing should also be protected from water hammer.

Where Should the Puretec WH1-30 Be Installed?

The WH1-30 is normally installed at the mains-water point of entry before the applicable household plumbing branches so filtered water can be supplied through the connected outlets.

The compact housing requires less wall area than a twin filter, but the mounting point still needs to remain rigid while the bowl is unscrewed during servicing. Puretec instructs that at least 50 mm clearance be provided beneath the housing and that installation in direct sunlight be avoided.

Where a leak could cause property damage, Puretec recommends suitable leak-management planning such as a drain pan or leak detection arrangement.

What's Included With Puretec WH1-30 Installation?

Selected JR Installation Package

The live product and installation selector above remains the source of truth for current installed pricing, installation timeframe and the inclusions attached to the package selected.

Mounting, Connection & Commissioning

For an applicable standard installation, the WH1-30 is securely mounted, connected to suitable accessible mains-water pipework and checked before normal water service is restored.

Possible Additional Work

Pressure control, backflow equipment, additional valves, pipe alterations, mounting reinforcement, leak protection, relocation or another non-standard requirement can require extra scope or quotation.

How Much Does Puretec WH1-30 Installation Cost?

Current supplied-and-installed pricing is shown in JR's live selector above. The selector should remain the pricing source rather than hard-coding a figure into the product content.

The final installation cost can vary with incoming-main access, pipe diameter, wall construction, existing isolation, pressure-control requirements, backflow equipment and whether the job is a direct replacement or a completely new installation.

If the property does not match the applicable standard package, use JR's written or onsite quote pathway before non-standard work proceeds.

BRISBANE INSTALLATION

Puretec WH1-30 Installation Brisbane

JR Gas & Water supplies and installs the Puretec WH1-30 across eligible Brisbane properties for customers wanting a compact single-stage whole-house filter on treated mains water.

For a Brisbane installation, JR considers the incoming main, household peak flow, line pressure, existing pipework and mounting location. The WH1-30 can suit properties where 30 L/min is adequate and there is no strong requirement for a separate sediment pre-filter.

Where sediment loading is significant or cartridge protection is a priority, the WH2-30 may be worth comparing because its first-stage PX05MP1 sediment cartridge operates before the carbon stage. Eligible JR service coverage also extends through Logan, Ipswich, Moreton Bay and Redlands.

GOLD COAST INSTALLATION

Puretec WH1-30 Installation Gold Coast

JR Gas & Water also provides Puretec WH1-30 supply and installation across eligible Gold Coast properties. Its compact single-housing format can suit locations where wall space is limited and straightforward mains-water carbon filtration is the primary treatment goal.

The Gold Coast installation position still needs suitable structural support, pressure control where required, protection from direct sunlight and enough access below the housing for cartridge replacement.

Where higher simultaneous flow, greater cartridge capacity or a separate sediment stage is required, a WH1-60 or WH2-series filter may be more appropriate than forcing the WH1-30 into an application beyond its published design.

Can the Puretec WH1-30 Replace My Existing Whole-House Filter?

Replacing Another WH1-30

An exact replacement may be relatively straightforward where the existing pipework, isolation, pressure control and mounting position remain suitable.

Replacing a Single 10-Inch Filter

Potentially. Connection size, housing dimensions, mounting position and cartridge function should still be confirmed before treating another system as like-for-like.

Replacing a WH2-30

Moving from WH2-30 to WH1-30 removes the dedicated first-stage sediment cartridge. Confirm that the simpler one-stage arrangement matches the water conditions before downsizing.

Replacing Another Brand

Connection size, bracket location, overall dimensions, pressure conditions and servicing clearance should be checked before installation.

Which Replacement Cartridge Does the Puretec WH1-30 Use?

Position	Cartridge	Size	Micron	Primary Function
Single Stage	CB10MP1	4.5" × 10"	10 micron	Bonded activated-carbon treatment for chlorine, taste, odour and sediment

Puretec specifies the CB10MP1 as the genuine standard replacement cartridge for the WH1-30. It is also used as the second-stage carbon cartridge in compatible WH2-30 and WH2-35 systems.

How Often Does the Puretec WH1-30 Need Servicing?

Puretec's WH-series maintenance documentation specifies cartridge replacement every 6–12 months depending on water quality and usage, with approximately six-month replacement recommended to maintain optimum filtered-water quality.

Chlorine & Treatment Load

The CB10MP1 has finite carbon capacity. Higher household water use or higher treatment demand can shorten its practical service life.

Sediment Loading

Because there is no separate sediment pre-filter, particulate loading reaches the CB10MP1 directly and can contribute to earlier flow reduction in dirtier water conditions.

Housing & O-Ring Maintenance

Puretec recommends inspecting the bowl and seal during servicing and replacing housing O-rings approximately every 3–5 years, or earlier where damage is evident.

Service indicators: reduced flow, returning chlorine taste or odour, an overdue cartridge date or visible deterioration around the housing are all reasons to inspect the system rather than waiting indefinitely.

Puretec WH1-30 vs WH2-30

Feature	Puretec WH1-30	Puretec WH2-30
Number of Housings	1	2
Maximum Flow	30 L/min	30 L/min
Connection	1" BSP	1" BSP
Stage 1	CB10MP1 carbon block	PX05MP1 5-micron sediment
Stage 2	Not applicable	CB10MP1 carbon block
Dedicated Sediment Pre-Filter	No	Yes
Cartridges to Replace	1	2
Published Height	Approx. 337 mm	Approx. 337 mm
Best Considered When	Simpler single-stage treatment suits the mains-water conditions	Separate sediment pre-filtration before carbon is preferred

The WH2-30 is not simply a higher-flow version of the WH1-30; both are rated to 30 L/min. The primary difference is filtration architecture: the WH2 adds a dedicated sediment stage before the same CB10MP1 carbon cartridge.

Puretec WH1-30 vs Other Whole-House Options

System	Maximum Flow	Filtration	Main Difference
Puretec WH1-30	30 L/min	Single 10-inch carbon stage	Compact single-stage system
Puretec WH1-60	60 L/min	Single 20-inch carbon stage	Higher-flow single-stage option
Puretec WH2-30	30 L/min	10-inch sediment + carbon	Adds separate sediment pre-filtration
Puretec WH2-60	60 L/min	20-inch sediment + carbon	Higher-flow twin-stage system
Puretec FilterWall	Model dependent	Model dependent	Enclosed premium whole-house platform
Puretec Softrol	Model dependent	Ion-exchange resin	Designed for hardness reduction rather than conventional carbon filtration

Puretec WH1-30 Warranty & Maintenance

10-Year Manufacturer Warranty

Puretec currently provides a 10-year warranty comprising 1 year parts and labour plus 9 years parts only on the WH1-30. The consumable cartridge is excluded.

Genuine CB10MP1 Replacement

Puretec instructs customers to use genuine replacement cartridges to maintain system performance, applicable standards and warranty conditions.

JR Lifetime Warranty Eligibility

JR's current WH1-30 listing identifies the installation as Lifetime Warranty eligible. JR's Lifetime Warranty is separate from Puretec's manufacturer warranty and subject to applicable JR conditions.

COMMON QUESTIONS

Puretec WH1-30 Installation FAQs

How much does Puretec WH1-30 installation cost?

Current supplied-and-installed pricing is shown in JR's live installation selector above. Final cost depends on the selected package and any pressure control, valves, backflow equipment, pipe changes or mounting work required.

Can JR install the Puretec WH1-30 in Brisbane?

Yes. JR Gas & Water supplies and installs the WH1-30 across eligible Brisbane and surrounding South East Queensland service areas.

Can JR install the Puretec WH1-30 on the Gold Coast?

Yes. Professional supply and installation are available across eligible Gold Coast areas where the mains-water plumbing, pressure, mounting location and flow requirements suit the system.

Is the Puretec WH1-30 a single-stage filter?

Yes. The WH1-30 uses one filter housing with one CB10MP1 carbon block cartridge.

Does the WH1-30 have a separate sediment pre-filter?

No. The CB10MP1 provides both carbon treatment and nominal 10-micron particulate filtration. The WH2-30 adds a separate 5-micron PX05MP1 sediment cartridge ahead of the carbon stage.

What is the maximum flow rate of the WH1-30?

Puretec publishes a maximum flow rate of 30 litres per minute.

What replacement cartridge does the WH1-30 use?

The genuine standard replacement cartridge is the Puretec CB10MP1 MaxiPlus™ carbon block.

What micron rating is the CB10MP1?

The CB10MP1 has a nominal 10-micron rating.

Does the Puretec WH1-30 reduce chlorine?

Yes. Chlorine reduction is one of the primary treatment functions Puretec publishes for both the WH1-30 and CB10MP1 cartridge.

Does the WH1-30 reduce sediment?

Yes. Puretec lists sediment reduction for the WH1-30 and CB10MP1, but the system does not have a separate dedicated sediment pre-filter.

Does the WH1-30 specifically reduce PFAS?

Puretec's current WH1-30 product page lists reduction of chemicals generally but does not specifically identify PFAS for this model. A product with explicit current PFAS performance documentation should be selected where PFAS is the primary treatment requirement.

Does the WH1-30 soften hard water?

No. It is a carbon filtration system. Conventional hardness reduction requires an ion-exchange water softener or another treatment system specifically designed for hardness.

Does the WH1-30 remove fluoride or TDS?

The WH1-30 is not reverse osmosis and should not be presented as a broad dissolved-solids or fluoride-removal system.

Does the Puretec WH1-30 require electricity?

No. It is a passive cartridge-filtration system and requires no electrical supply.

What size connection does the WH1-30 use?

The current WH1-30-LF uses a 1-inch BSP / 25 mm connection.

What is the maximum pressure for the WH1-30?

Puretec's current product page lists 520 kPa maximum pressure. Its installation guide requires an approved pressure-limiting device where incoming line pressure exceeds 500 kPa.

What are the Puretec WH1-30 dimensions?

Puretec's published WH1 drawing shows the WH1-30 at approximately 337 mm high × 181 mm wide × 209 mm deep, with approximately 150 mm rear mounting-hole spacing.

How often should the CB10MP1 be replaced?

Puretec's WH-series guidance specifies cartridge replacement every 6–12 months depending on water quality and usage and recommends approximately six-month replacement for optimum filtered-water quality.

Can the WH1-30 be used on untreated rainwater?

The WH1 range is designed for mains water. Puretec warns against using the system on microbiologically unsafe or unknown-quality water without adequate disinfection. Rainwater or bore-water treatment should be assessed separately.

Is the Puretec WH1-30 WaterMark certified?

Puretec's WH-series documentation identifies AS 3497 WaterMark certification under Licence No. WM 74617.

Is the Puretec WH1-30 NSF/ANSI certified?

JR's current product metadata displays “NSF/ANSI Certified: Yes”. The Puretec manufacturer material reviewed does not identify the specific complete-system NSF/ANSI certification basis, so a specific certification standard should be confirmed before publication.

What is the Puretec WH1-30 warranty?

Puretec currently provides a 10-year system warranty consisting of one year parts and labour plus nine years parts only. The replaceable cartridge is excluded.

Why Choose JR Gas & Water for Puretec WH1-30 Installation?

Correct Single vs Twin Selection

JR can assess whether the simpler WH1 configuration suits the water conditions or whether a separate WH2 sediment stage would be more appropriate.

Installation-Led Setup

Pressure, mounting, backflow protection, isolation and cartridge-service access are considered as part of the complete installation.

Brisbane & Gold Coast Coverage

Professional whole-house filtration installation and servicing are available across eligible Brisbane, Gold Coast and surrounding South East Queensland service areas.

COMPARE YOUR OPTIONS

Related Whole-Home Water Filtration Options

Compare JR's current whole-home mains filtration range, Puretec systems and genuine replacement cartridges before selecting your final filtration setup.

All Water Filtration Systems Whole Home Mains Water Filtration Water Filter Cartridges Puretec What's in Brisbane's Drinking Water

READY TO INSTALL

Install the Puretec WH1-30 With JR Gas & Water

The Puretec WH1-30 is the compact single-stage option in Puretec's conventional whole-house mains-water range. Its CB10MP1 carbon block, 30 L/min maximum-flow rating, 1-inch plumbing connection and one-cartridge servicing arrangement make it a straightforward option where those specifications match the property's water conditions and demand.

JR Gas & Water supplies and installs the WH1-30 across eligible Brisbane and Gold Coast properties. Before booking, confirm the mains-water connection, peak household flow, pressure, mounting position, service clearance and current installation package through the live options above.

Choose Your Installation Package Above

Select the applicable package and preferred installation timeframe using JR's live selector. If the property requires pressure control, backflow equipment, additional isolation, significant pipe alterations, mounting reinforcement or another non-standard requirement, use the written or onsite quote pathway before proceeding.

Puretec WH1-30 | Supply+Install | LIFETIME WARRANTY

Silver Package

Select Your Preferred Install

Our Water Filtration Installer Verdict

Water Filter Installation Areas