RANGE OF AVAILABLE REPLACEMENT SYSTEMS
200L SPLIT-SYSTEM HEAT PUMP HOT WATER
Emerald 200L Split System Heat Pump Installation Brisbane & Gold Coast
JR Gas & Water supplies and installs the Emerald 200L Split System Hot Water Heat Pump across eligible Greater Brisbane, Gold Coast and surrounding South East Queensland service areas.
The current Emerald Split System uses a separate 200L storage tank and outdoor heat-pump unit. This gives the installer more freedom to position the cylinder independently from the fan and compressor, which can be particularly useful where an all-in-one heat pump does not suit the property's available space.
Emerald's current 200L manufacturer data lists HPR200 and HPR200E variants. Both use a 2.8kW heat-pump heating platform, DC inverter compressor and fan technology, R290 refrigerant, Boost and Silent operating modes and a broad -15°C to 46°C ambient operating range. The HPR200E adds a 2.1kW electric heater.
Emerald 200L Split System at a glance: 200L storage, approximately 2.8kW heat-pump heating capacity, 1.15kW maximum heat-pump power input under Emerald's stated test conditions, approximately 60.2L/hour published hot-water yield, R290 refrigerant, 54dB(A) outdoor sound pressure, up to 20m refrigerant pipe length and up to 10m height difference between components. The tank measures approximately 505mm in diameter × 1665mm high.
PRODUCT AT A GLANCE
Emerald 200L Split Heat Pump Hot Water
200L Storage
A compact split-system storage size for households that do not require the larger 300L cylinder.
Split-System Design
The tank and outdoor heat-pump unit can be positioned separately within the manufacturer's installation limits.
2.8kW Heating Capacity
Emerald's current technical data lists 2800W heat-pump heating capacity under its stated test conditions.
R290 Refrigerant
Uses R290 natural refrigerant with a published global warming potential of 3.
WHO IT SUITS
Is the Emerald 200L Split System Right for Your Home?
The 200L Split System is particularly relevant where a property needs efficient stored hot water but does not require the greater reserve of the 300L model.
Smaller to Moderate Demand
The 200L cylinder can suit homes where daily hot water demand is lower than the larger 300L split-system application.
Difficult Installation Layouts
Separating the tank and outdoor unit can help where the best cylinder location does not provide enough airflow for an all-in-one heat pump.
Space-Conscious Properties
The 505mm tank diameter can be useful where a larger integrated heat pump footprint would be difficult to accommodate.
Choose by demand and layout together. The 200L model is physically smaller than the 300L version, but household hot water usage still needs to suit the available stored-water volume and recovery rate.
WHY CHOOSE A SPLIT SYSTEM?
Split Heat Pump vs All-In-One Heat Pump
The main difference is the location of the refrigeration equipment. An all-in-one system combines the storage tank, fan and compressor into one unit. Emerald's Split System separates the water cylinder from the outdoor refrigeration unit.
Tank Placement Flexibility
Emerald states that the split-system tank can be located indoors or outdoors where the full installation requirements are met.
Fan Unit Outdoors
The heat-pump fan and compressor unit remains outdoors where it can exchange heat with ambient air.
Useful for Narrow Spaces
Separating the components can make installation practical where one large all-in-one unit would create clearance or access problems.
The current Emerald Split System does not use the same smart-control setup as Emerald's All-In-One range. Emerald states that the Split System is managed using the control panel built into the outdoor fan unit rather than the All-In-One range's built-in app integration.
FLEXIBLE PLACEMENT
How Far Apart Can the Tank and Outdoor Unit Be?
Emerald's current technical data gives the split system significant placement flexibility while still setting clear design limits.
Up to 20m Pipe Length
Emerald lists a maximum refrigerant pipe length of 20 metres.
Up to 10m Height Difference
The current manufacturer specification permits up to 10 metres of vertical difference between the connected components.
Quick Connection
Emerald promotes a quick-connection system designed without the conventional onsite vacuum process used by many split refrigeration installations.
The maximum permitted distance is not automatically the preferred installation layout. The actual refrigerant run, component positions and service access should be determined during installation planning.
HOW IT WORKS
How Does the Emerald 200L Split Heat Pump Work?
The outdoor heat-pump unit extracts thermal energy from ambient air and moves that heat through the refrigeration circuit to the hot water storage system.
Ambient Heat Is Collected
The fan moves outdoor air across the heat exchanger so the R290 refrigeration circuit can collect usable heat.
DC Inverter Compressor
Emerald uses a DC inverter rotary compressor and DC inverter fan to manage the refrigeration cycle.
Stored Water Is Heated
The refrigeration circuit transfers heat into the 200L storage tank so heated water is available for normal household use.
RECOVERY PERFORMANCE
How Quickly Does the Emerald 200L Heat Water?
Emerald's current technical sheet lists a published hot-water yield of approximately 0.0602m³/hour, or 60.2L/hour, under its stated test conditions.
Approximately 60.2L/Hour
Published with 19/15°C dry-bulb/wet-bulb ambient conditions, 15°C initial water and 55°C terminal water under the applicable manufacturer test reference.
200L Stored Reserve
Recovery works alongside the existing stored volume rather than requiring the entire cylinder to reheat from cold after every normal draw.
Conditions Change Recovery
Ambient temperature, inlet-water temperature, target temperature and operating mode can all change real recovery performance.
Published recovery is a test-condition figure, not a fixed result for every property. Real-world heat-pump output changes as ambient and water temperatures change.
OPERATING RANGE
Built for a Wide Range of Australian Conditions
Emerald publishes a broad operating envelope for the current Split System range.
-15°C Ambient
The published lower ambient operating limit is -15°C.
46°C Ambient
The published upper operating limit is 46°C.
52–60°C Water
Emerald's current residential HPR200 / HPR200E specification lists a 52°C to 60°C leaving-water range with 60°C as the default.
Emerald also documents higher-temperature commercial variants separately. For normal residential HPR200 / HPR200E product data, the current manufacturer table lists 52–60°C rather than treating 70°C as the standard residential operating range.
BOOST & SILENT MODES
Extra Recovery or Quieter Operation
Boost Mode
Emerald provides Boost mode to speed up the heating process when additional hot water is required more quickly.
Silent Mode
Silent mode reduces system sound output when quieter operation is preferred.
54dB(A) Outdoor Unit
The current manufacturer specification lists an outdoor sound pressure level of 54dB(A) under its stated measurement conditions.
Good placement still matters. Positioning the outdoor unit with bedrooms, neighbouring properties and reflective walls in mind can be just as important as having a quieter operating mode available.
ENERGY SAVINGS
How Efficient Is the Emerald Split System?
Emerald currently markets its Split System as its most efficient hot water system and advertises potential savings of up to 80% under its published comparison assumptions.
Heat From the Air
The system uses electricity to move ambient heat into the stored water rather than relying entirely on resistance heating.
DC Technology
Emerald states that its DC compressor and fan technology manages output according to heating demand.
Real Savings Vary
Electricity tariff, household usage, ambient conditions, target temperature and auxiliary-heater operation all affect real running cost.
“Up to 80%” is a manufacturer marketing claim rather than a guaranteed bill reduction. The actual result depends on what system is being replaced and how hot water is used at the property.
HPR200 VS HPR200E
Emerald 200L Standard vs Electric-Heater Variant
Emerald's current manufacturer data lists both HPR200 and HPR200E variants. The core 200L split heat-pump platform is shared, while the E variant includes an electric heater.
| Specification | HPR200 | HPR200E |
|---|---|---|
| Tank Capacity | 200L | 200L |
| Heat-Pump Heating Capacity | 2.8kW | 2.8kW heat-pump platform |
| Heat-Pump Maximum Input | 1.15kW under stated test conditions | 1.15kW heat-pump input under stated test conditions |
| Electric Heater | Not listed | 2.1kW |
| Manufacturer Maximum Current | 5.2A | 14.3A |
| Tank Weight | Approximately 74kg | Approximately 76kg |
| Installation Direction | Heat-pump-only configuration. | Configuration with additional electric heating capability. |
Confirm the exact supplied variant before installation. Electrical requirements differ materially between the HPR200 and HPR200E even though both are part of the same 200L split-system family.
TECHNICAL DETAILS
Emerald 200L Split System Specifications
| Brand | Emerald |
|---|---|
| Current 200L Variants | HPR200 / HPR200E |
| System Type | Split-system air-source heat pump storage water heater |
| Tank Capacity | 200 litres |
| Heat-Pump Heating Capacity | 2800W under Emerald's stated test conditions |
| Heat-Pump Maximum Power Input | 1150W under Emerald's stated test conditions |
| Published Hot-Water Yield | Approximately 0.0602m³/hr / 60.2L/hr under the stated manufacturer test condition |
| Ambient Operating Range | -15°C to 46°C |
| Residential Leaving-Water Range | 52°C to 60°C, default 60°C |
| Power Supply | 220–240V / single phase / 50Hz |
| HPR200 Maximum Current | 5.2A |
| HPR200E Maximum Current | 14.3A |
| HPR200E Electric Heater | 2.1kW |
| Compressor | DC inverter rotary |
| Fan | DC inverter |
| Expansion Control | Electronic expansion valve |
| Outdoor Sound Pressure | 54dB(A) |
| Refrigerant | R290 |
| Refrigerant Charge | 470g |
| Refrigerant GWP | 3 |
| Liquid Refrigerant Connection | 6.35mm / 1/4" |
| Gas Refrigerant Connection | 9.52mm / 3/8" |
| Maximum Refrigerant Pipe Length | 20m |
| Maximum Height Difference | 10m |
| Refrigerant Design Pressure | 3.3MPa |
| Outdoor Unit Dimensions | Approximately 804 × 327 × 555mm |
| Outdoor Unit Weight | Approximately 27kg |
| Tank Dimensions | Approximately 505mm diameter × 1665mm high |
| Tank Weight | Approximately 74kg HPR200 / 76kg HPR200E when empty |
| Control | Control panel located on the outdoor fan unit |
| Manufacturer Warranty | 2 years service, 5 years parts and 7 years tank, subject to Emerald's current warranty terms |
Current manufacturer data should override older indexed product fields. JR's live product page still contains legacy specification fields from an earlier Emerald 200L generation, so the technical table above follows Emerald's September 2025 Split System datasheet.
200L VS 300L
Emerald Split System 200L vs 300L
| Specification | 200L Split | 300L Split |
|---|---|---|
| Storage Capacity | 200L | 300L |
| Tank Diameter | 505mm | 580mm |
| Tank Height | 1665mm | 1735mm |
| Standard Tank Weight | Approximately 74kg | Approximately 100kg |
| Outdoor Unit | Same current split-system platform | Same current split-system platform |
| Heat-Pump Heating Capacity | 2.8kW | 2.8kW |
| Published Hot-Water Yield | Approximately 60.2L/hr | Approximately 60.2L/hr |
| Primary Difference | Smaller stored-water reserve and more compact cylinder. | Larger stored reserve for higher daily demand. |
The 300L model is mainly about increased storage rather than a more powerful heat pump. Emerald's current datasheet gives both storage sizes the same published 2.8kW heat-pump capacity and hot-water-yield reference.
INSTALLATION REQUIREMENTS
What Is Required to Install an Emerald 200L Split Heat Pump?
Suitable cylinder location with adequate support for the 200L tank when filled with water.
Outdoor heat-pump location providing appropriate airflow around the fan and heat exchanger.
Suitable refrigerant route between the two components within Emerald's permitted installation limits.
Appropriate mains-water services and pressure-control equipment where required.
Storage-system safety drainage including the applicable relief-valve arrangement.
Suitable electrical supply matched to the exact HPR200 or HPR200E configuration.
Service access retained to both the tank and outdoor refrigeration unit.
Professional commissioning of the plumbing, electrical and split refrigeration system.
A split heat pump requires more installation planning than simply replacing a storage tank. The tank position, outdoor-unit position and connecting services all form part of the final installation design.
REPLACEMENT OPTIONS
Can the Emerald 200L Split Replace My Existing Hot Water System?
Electric Storage Replacement
The existing tank location may remain useful for the new cylinder while the outdoor heat-pump unit is positioned separately for better airflow.
Existing Heat Pump
Another heat pump can often be replaced, but its electrical, plumbing, drainage and equipment layout still need to be checked against the Emerald system.
Space-Constrained Conversion
The split format can create an installation pathway where a larger all-in-one heat pump cannot fit comfortably in the available area.
Do not choose the 200L model from footprint alone. The cylinder may fit the property well but still needs enough storage capacity for the household's real hot water demand.
GOVERNMENT INCENTIVES
Can the Emerald 200L Split Qualify for Incentives?
Emerald promotes eligible heat-pump installations for applicable energy-efficiency incentive programs where the approved model, installer, property and installation meet current scheme requirements.
Certificate quantities, rebate values and eligibility conditions change over time, so they should not be hardcoded into long-form product content.
Use JR's live selector or quote pathway above. Any current STC or other incentive value should be confirmed for the exact installation at the time of purchase.
JR INSTALLATION
What's Included With Emerald 200L Split Installation?
JR's live installation selector or quote pathway above should be used to confirm the current installation scope. The required work depends heavily on the proposed positions of both the tank and outdoor unit.
System Supply
Supply of the applicable Emerald 200L Split System equipment within the selected installation package or quoted scope.
Tank Installation
Connection of the 200L cylinder to suitable water services within the applicable installation scope.
Outdoor Unit Installation
Positioning and connection of the separate heat-pump unit according to the approved site layout.
Testing & Commissioning
The completed system is commissioned and checked for normal hot water, refrigeration and control operation.
Do not assume every installation package includes relocation, old-system disposal, new electrical work, long refrigerant runs, new bases, pipe rerouting or pressure-control upgrades. Check the live selected package for the exact inclusions.
CURRENT PRICING & AVAILABILITY
How Much Does Emerald 200L Split Installation Cost?
Use the live product selector, availability information or quote pathway above for current supplied-and-installed pricing.
Split-system pricing can vary according to how far apart the tank and outdoor heat-pump unit need to be positioned and how much plumbing, electrical and refrigeration work is required between them.
Simple Replacement Layout
A suitable existing cylinder position with a nearby outdoor-unit location can reduce the amount of modification required.
Extended Split-System Layout
Greater component separation or more complex service routing can increase installation scope.
Relocation or Conversion
New plumbing, electrical work, drainage, support bases or a completely different equipment position can materially affect the final package.
Check Current Emerald 200L Split Availability
Use JR's live information above for the current stock position, package options and installation pathway. If the product is sold out, use the restock or quote option rather than relying on an older advertised price.
BRISBANE INSTALLATION
Emerald 200L Split Heat Pump Installation Brisbane
JR Gas & Water installs Emerald heat pump hot water systems across eligible Greater Brisbane service areas.
The split design can be particularly useful on properties where the existing tank location is practical for water services but does not offer the airflow or acoustic position preferred for a fan-and-compressor unit.
Placing the outdoor unit separately allows the system layout to be designed around tank access, fan airflow, pipe routing and the property's existing services rather than forcing every component into one location.
GOLD COAST INSTALLATION
Emerald 200L Split Heat Pump Installation Gold Coast
JR Gas & Water also installs suitable heat pump hot water systems across eligible Gold Coast service areas.
On properties with narrow side access, courtyards or limited service areas, separating the 505mm-diameter cylinder from the outdoor unit can create installation options that may not be available with a bulky integrated heat pump.
The final design should still consider coastal exposure, fan airflow, noise, refrigerant routing, drainage and access for future service work.
WARRANTY
Emerald 200L Split System Warranty
Emerald's current dedicated Split System product information and September 2025 datasheet list separate warranty periods:
2 Years
Service warranty under Emerald's current Split System warranty structure.
5 Years
Parts warranty, subject to Emerald's full terms and exclusions.
7 Years
Tank warranty under Emerald's current dedicated Split System product information.
The seven-year figure applies specifically to the tank rather than every component. Service, parts and tank warranty periods are separate and remain subject to Emerald's current warranty conditions.
JR's live product page currently identifies the Emerald 200L Split as eligible for JR's Lifetime Warranty program. JR-specific coverage is separate from Emerald's manufacturer warranty and remains subject to JR's applicable terms.
COMMON QUESTIONS
Emerald 200L Split Heat Pump FAQs
What are the current Emerald 200L Split model variants?
Emerald's current September 2025 technical sheet lists HPR200 and HPR200E as the residential 200L Split System variants.
What is the difference between HPR200 and HPR200E?
The HPR200E includes a 2.1kW electric heater and has a higher manufacturer-listed maximum current. The standard HPR200 is listed without that electric heater.
How much water does the Emerald 200L Split store?
The current system uses a 200 litre storage tank.
How powerful is the heat pump?
Emerald's current datasheet lists approximately 2.8kW heating capacity under its stated test conditions.
How much electricity does the heat-pump section use?
The current technical data lists approximately 1.15kW maximum heat-pump power input under Emerald's stated test conditions. The HPR200E's electric heater adds separate electrical demand when used.
How quickly does it heat water?
Emerald publishes approximately 60.2 litres per hour of hot-water yield under its specified test condition.
Can the tank and fan be installed separately?
Yes. That is the main advantage of the Split System. The storage tank and outdoor heat-pump unit are separate and connected within the manufacturer's installation limits.
Can the storage tank be installed indoors?
Emerald states that the Split System tank can be positioned indoors or outdoors where the installation requirements can be met. The fan and compressor unit remains outdoors.
How far can the outdoor unit be from the tank?
The current manufacturer specification lists up to 20 metres maximum refrigerant pipe length.
What is the maximum height difference?
Emerald lists a maximum vertical difference of 10 metres between the split-system components.
What refrigerant does the Emerald Split use?
The current system uses R290 refrigerant with a 470g charge and published GWP of 3.
What temperatures can the residential model produce?
Emerald's current HPR200 / HPR200E residential specification lists a leaving-water range of 52°C to 60°C with 60°C as the default.
What ambient temperatures can it operate in?
The current Split System range is specified for ambient temperatures from approximately -15°C to 46°C.
Does the Emerald Split System have Boost mode?
Yes. Emerald lists Boost mode to speed up water heating when additional hot water is required.
Does it have Silent mode?
Yes. Emerald lists Silent mode for quieter operation. The current technical sheet lists outdoor sound pressure at 54dB(A) under its specified conditions.
Does the Emerald Split System have app control?
Emerald currently distinguishes the Split System from its All-In-One range by using an inbuilt control panel on the outdoor fan unit. Built-in smartphone app control should not be assumed for the Split System.
How large is the 200L tank?
The current tank is approximately 505mm in diameter and 1665mm high.
How large is the outdoor heat-pump unit?
The outdoor unit measures approximately 804mm long, 327mm deep and 555mm high and weighs approximately 27kg.
What is the difference between the Emerald 200L and 300L Split?
The main difference is storage capacity and tank size. Emerald's current datasheet gives both the 200L and 300L systems the same published 2.8kW heat-pump capacity and approximately 60.2L/hour hot-water-yield reference.
Can the Emerald 200L Split replace electric storage?
Potentially, yes. The old cylinder location may be suitable for the new tank while the heat-pump outdoor unit is positioned separately. Plumbing, electrical, drainage and split-system routing still need assessment.
Can the Emerald Split save up to 80%?
Emerald advertises potential savings of up to 80% under its published comparison assumptions. Actual savings depend on usage, tariff, climate, system settings and the water heater being replaced.
Is the Emerald 200L Split eligible for incentives?
Eligible Emerald heat-pump installations may qualify for current energy-efficiency incentives. Eligibility depends on the approved model, installer, property, postcode, installation date and current scheme rules.
What warranty does the Emerald 200L Split have?
Emerald's current dedicated Split System information lists two years service, five years parts and seven years tank warranty, subject to the manufacturer's full terms.
How much does Emerald 200L Split installation cost?
Use JR's live product information, selector or quote pathway above for current pricing. Installation cost depends on the tank location, outdoor-unit location and the plumbing, electrical and refrigeration work required.
Can JR install the Emerald 200L Split in Brisbane?
Yes. JR Gas & Water installs suitable heat pump hot water systems across eligible Greater Brisbane service areas.
Can JR install the Emerald 200L Split on the Gold Coast?
Yes. Installation is available across eligible Gold Coast service areas where the proposed tank and outdoor-unit locations suit the system.
Is the Emerald 200L Split currently available?
JR's current product page may show changing stock status. Use the live availability above or JR's restock and quote pathway rather than relying on an older availability or price.
READY TO INSTALL
Install the Emerald 200L Split Heat Pump With JR Gas & Water
The Emerald 200L Split System is a flexible heat-pump option for properties where a smaller stored-water reserve is appropriate and separating the cylinder from the outdoor fan and compressor creates a better installation layout.
Use the live product information, installation selector or quote pathway above to check current availability and installation options. If you are unsure whether 200L is enough capacity, whether the HPR200 or HPR200E configuration suits the property, or whether an all-in-one heat pump would be simpler, use JR's quote or site-assessment pathway before booking.
ZipPay – 6-Month Interest-Free on All Products
ZipPay allows you to buy now and pay later, offering flexible, interest-free payments for up to 6 months on all JR products. It’s easy to set up, and you can customize your repayment schedule to suit your budget. Payments can be made weekly, fortnightly, or monthly, with a $6 fee if the balance isn’t paid off by the due date.
Humm – Up to 12 Months Interest-Free
Humm provides interest-free payment plans on purchases up to $30,000, perfect for both small and large buys. For items over $2,000, you can spread payments over 12 months. Humm also offers flexibility in scheduling payments based on when you get paid
Afterpay – 8 Weeks, No Interest
With Afterpay, spread the cost of purchases across four equal installments, due every two weeks, over an 8-week period. There’s no interest, and as long as payments are made on time, there are no fees. Perfect for purchases between $100 and $1,500
Plenti Finance – For Reclaim Systems Only
Plenti Finance is available exclusively for Reclaim Energy systems. This option offers tailored repayment terms with competitive interest rates, helping make eco-friendly choices more affordable. For more detailed information on Plenti’s terms and eligibility for Reclaim systems, visit the Reclaim Energy finance page
Brand - Emerald Energy
Model Number - EE-HWS-RCHP-200
Volume - 200L
Width - 555mm
Height - 1665mm
Manufactured In - China
Cylinder/ Heat Exchange Material - Steel Enamel
Cylinder/Heat-Exchange Warranty - 5 Years
Noise Level - dBa
Dry Weight - kg
Energy Source -
Wifi Controller Built in or Compatible - No
Built In Timer -
LED/LCD Status Indicator - Yes
Coefficient of Performance (COP) - 3.6
If you're in Queensland and considering a new electric hot water system, JR Gas & Water is the company to choose. Here's why:
Experience and Expertise: JR Gas & Water has over 10 years of experience in the gas and plumbing industry. Their team of licensed and insured professionals is highly skilled and knowledgeable about all aspects of electric hot water system installation, maintenance, and repair. They can provide expert advice on the best system for your needs and ensure a smooth installation process.
Quality Products: JR Gas & Water uses only high-quality products from trusted brands to ensure your electric hot water system is reliable and efficient. They also offer a range of options to suit different budgets and requirements.
Competitive Pricing: JR Gas & Water offers competitive pricing for their electric hot water systems, ensuring that you get a great value for your investment. They also provide a detailed quote upfront, so there are no surprises or hidden costs.
Customer Service: JR Gas & Water is committed to providing excellent customer service. They are always available to answer any questions or concerns you may have and are committed to ensuring your satisfaction.
Local Business: JR Gas & Water is a locally owned and operated business in Queensland. By choosing them for your electric hot water installation, you are supporting a local business and contributing to the local economy.
Warranty and Guarantee: JR Gas & Water provides a warranty and guarantee on all their products and services, giving you peace of mind knowing that your system is covered in case of any issues.
Energy Efficiency: Electric hot water systems can be energy efficient, and JR Gas & Water can help you choose the right system for your needs. They can provide advice on energy-saving features and options, such as timers and thermostats, to help you save on your energy bills.
Safety: JR Gas & Water is committed to safety and ensuring that all installations are done to the highest safety standards. They are also familiar with local safety regulations and requirements, ensuring that your electric hot water system is installed safely and in compliance with all relevant codes.
JR Gas & Water is a reliable and experienced choice for your electric hot water system installation in Queensland. With a commitment to quality products, competitive pricing, excellent customer service, and safety, they can help you make the switch to a more efficient and cost-effective solution for your hot water needs. Contact them today to learn more about their services and how they can help you.
JR GAS & WATER INSTALLER ASSESSMENT
Our Installer Verdict
This is the part of the product page we consider most important. It is not based on manufacturer marketing or homeowner-facing specifications. This is our own assessment of what the product is actually like for our team to install, commission, service and support.
--/100
Recently viewed
