Puretec EM2-80 β Bray Park, July 2023
Back in July 2023, our team was in Bray Park for a Puretec EM2-80 whole-home filter. The plan was to filter water for the house, not just at the kitchen sink. We fitted the unit and completed the job.
Your supply and treatment goal matter more than a suburb average. This guide narrows options; final suitability depends on the actual property and water testing.
There's a water sample in our records from Strathpine (2025, mains water). That's a different property, not a test of your Joyner supply. We'd want to know where your water comes from and what you're trying to treat before using any readings to choose a filter.
At a Joyner acreage or larger-block property, we'd check whether the house runs on mains, tank, bore or a changeover. We'd also look at the pump, water pressure, entry point and room to service cartridges. A filter for the garden or stock line might not be right for the drinking-water taps.
Measurements relate to the named properties and stages only. They do not establish an average or prove water is safe to drink.
Looking at water filtration for your Joyner home? We install whole-home filters, kitchen drinking-water systems and reverse osmosis. See some of our recent work around Moreton Bay, along with feedback from JR customers.
These numbers count installation jobs. Some homes had more than one filter fitted.
We've completed 10 water filter installations around Moreton Bay. You can see some of our nearby work below.
Before choosing a system, we'll look at where your water comes from, the pipework, water pressure and how much flow your household needs. Rainwater and bore supplies can need extra testing and treatment, especially for drinking. See what customers say about JR.
Here's where we've worked and what each job involved.
Back in July 2023, our team was in Bray Park for a Puretec EM2-80 whole-home filter. The plan was to filter water for the house, not just at the kitchen sink. We fitted the unit and completed the job.
In July 2026, we went to a Morayfield property to install a customer-supplied filter. The customer had their own filtration unit, so the work was installation-only rather than supplying a new filter system. We fitted the unit and completed the job.
JR Gas and Water recently installed a heat pump hot water system and whole house filtration system to our house.
Heaps cheaper than other quotes. No hidden charges, arrived as promised and job done well. Very surprised; thought service like this was a thing of the past! Thank you
JR Gas &Water were very prompt in sending quote and on acceptance of quote attended within a few hours. Installation was professional and thorough. Overall would thoroughly recommend their service.
Here's some of the water filtration work our team has completed around Moreton Bay. You'll find the suburb and job details with each project.
Back in July 2023, our team was in Bray Park for a Puretec EM2-80 whole-home filter. The plan was to filter water for the house, not just at the kitchen sink. We fitted the unit and completed the job.
In July 2026, we went to a Morayfield property to install a customer-supplied filter. The customer had their own filtration unit, so the work was installation-only rather than supplying a new filter system. We fitted the unit and completed the job.
We fitted a Puretec RO270 reverse-osmosis system for a North Lakes customer in June 2025. This job combined the RO270 drinking-water filter with a pull-down three-way kitchen mixer, so the filtered-water outlet was part of the tapware. That was the completed filtration work for this visit.
If you're on acreage in Joyner, the big question is whether the house uses mains water, a rainwater tank, bore water or a combination. For tank or pump-fed water, we also check pressure, sediment and whether separate treatment is needed for drinking water.
Homes around Joyner include acreage homes, modern estate houses, low-set brick homes and larger family blocks. Not every place has the same water source. One home might use mains, while the next uses tank water or a pump. We'd check which supply feeds your taps first.
Is it grit in the water, a chlorine taste, or something you've been told needs checking? Tell us what's happening at your Joyner property. We'll check the supply and choose a filter for that problem, not just the postcode.
There's a water sample in our records from Strathpine (2025, mains water). That's a different property, not a test of your Joyner supply. We'd want to know where your water comes from and what you're trying to treat before using any readings to choose a filter.
At a Joyner acreage or larger-block property, we'd check whether the house runs on mains, tank, bore or a changeover. We'd also look at the pump, water pressure, entry point and room to service cartridges. A filter for the garden or stock line might not be right for the drinking-water taps.
For whole-home filtration in Joyner, we'd check how the tank or pump delivers water, peak flow, sediment and where the filter can be mounted. If the supply isn't treated mains water, testing may show that extra stages are needed. We also plan for bypass and cartridge changes.
A kitchen filter is worth discussing if the main goal is drinking and cooking water. Before fitting one, we check the mixer, cold-water supply, cupboard clearance and where the cartridges will come out for replacement.
Reverse osmosis can be useful for a specific drinking-water concern, but it needs the right feed pressure, a drain for reject water and room for the membranes and filter changes. With a tank or pump supply, we may also need pretreatment and extra pressure checks.
If you're using rainwater, bore water or a mix of supplies, we'd want to understand the source and whether drinking-water testing is needed. A carbon cartridge on its own doesn't make untreated water safe. Depending on the results, sediment filtration, UV or another suitable treatment might be needed.
Here are some individual-property test results we have on file for comparison. None of these is a water test from your Joyner address.
Strathpine (2025; mains water; filtration stage not specified) β pH 7.54; hardness 74 mg/L; TDS 195 mg/L; turbidity 0.02 NTU.
Cashmere (2025; mains water; filtration stage not specified) β pH 7.43; hardness 45 mg/L; TDS 157 mg/L; turbidity 0.09 NTU.
Narangba (2025; mains water; filtration stage not specified) β pH 6.73; hardness 7 mg/L; TDS 20 mg/L; turbidity 0.63 NTU.
The numbers belong to the properties and treatment stages named above. A post-filter result is treated water, not a reading from the raw supply. We'd test or check the water at your own Joyner property before making a recommendation; these figures alone don't prove water is safe to drink.
Two homes in the same area can have different water. These results come from individual properties and might not reflect what comes out of your tap. We recommend testing your own supply before deciding on treatment.
For tank- or bore-fed homes, we'd start with the water source and any testing, not a particular model. Whole-home filtration is an option when you want water treated at multiple taps. Under-sink filtration keeps the job to the kitchen, while reverse osmosis is worth discussing for a specific drinking-water need. We can check your actual supply before giving you a firm recommendation.
The best filter depends on where your water comes from. Here's what JR has recorded at some mains-water properties in Moreton Bay, and what to look at if your home uses rainwater.
These figures come from 9 mains-water samples JR recorded in 2025β2026. They show the median (middle) reading from those tests. The samples were taken before filtration or had no confirmed filtration stage. They don't represent every home in the area or establish that water is safe to drink.
Readings differed quite a bit between homes. Check your own water before choosing a filter for taste, sediment or mineral build-up.
Across the tested properties, hardness ranged from 7 to 115 mg/L, dissolved solids from 20 to 291 mg/L, and turbidity from 0.02 to 0.63 NTU. These are readings from individual properties, not a test of the whole water network.
* Hardness figures use the units recorded in JR's test sheets; check the test method and units before comparing them with a filter specification. These aren't readings from the water supplier's monitoring program. A result of 0.02 NTU doesn't mean there's no turbidity. None of these figures describes rainwater, bore water or a private supply, and the four measurements can't tell you whether chlorine, PFAS, germs or other contaminants are present. They aren't a drinking-water safety test.
Tank water needs its own check. Roof and gutter condition, first-flush setup, animals, tank maintenance, how long the water sits and what you use it for can all make a difference. The mains-water readings above don't apply to rainwater tanks. Treatment needs to suit the water in your tank and how you plan to use it.
Check the roof and gutters, leaf screens, first-flush diverter, tank lid and overflow protection. Keeping dirt and animals out of the tank is just as important as the filter itself.
If you drink or cook with tank water, have the microbial risks assessed and arrange suitable testing. Depending on the property, you may also need to check sediment, acidity, metals, chemicals or an unusual colour or smell.
A sediment filter can help stop particles reaching taps and other equipment. Carbon or other filter media may help with particular problems, but a cartridge filter by itself isn't a substitute for disinfection.
If the water will be used for drinking, check whether a properly sized and maintained UV or another suitable disinfection system is needed. UV relies on clear enough water and a reliable power supply, and it won't remove dissolved chemicals.
Tell us whether you're using town water, rainwater or both, and what you'd like to improve. We can check flow, space and plumbing requirements to help you choose a suitable system.
Answers about water-filter suitability, installation work and water testing for properties in and around Joyner.
Usually we'd look at the main water entry or the kitchen cold-water line, depending on what you want filtered. At a Joyner property using tanks or a pump, we'd also check the water source, pressure and whether there's room to service the filters.
Not in Joyner itself, based on the completed jobs in our current records. We have 10 installations across Moreton Bay, including Puretec EM2-80 in Bray Park. We list that job under its real suburb rather than claiming it happened here.
No. The example we've shown was taken at a property in Strathpine in 2025, not at your Joyner address. It's useful for context, but we'd check or test your own water before using any readings to choose treatment.
Any nearby water-test readings relate to the sampled property, not every home in the suburb. Filter selection and installation requirements should be confirmed for your actual water source and plumbing.
Want better-tasting drinking water or a filter for the whole house? Compare your options, see the prices and check what installation involves before you book.
10 recent water filter installations across Moreton Bay
Compare whole-home, kitchen and drinking-water options.
See the price and what's involved for your property.
See the booking options available for your address.
On rainwater or bore water? Testing may be needed before choosing a filter for drinking water. We'll check the setup before confirming the installation.