JR GAS & WATER INSTALLER ASSESSMENT
Our Electric Instantaneous Hot Water Installer Verdict
This is the part of the product page we consider most important. It is our assessment of the product from the installer's side: construction, mounting, water connections, electrical integration and ongoing support, rather than a repeat of the specification sheet.
--/100
JR GAS & WATER LOCAL INSTALLATION
Local Hot Water Installation Areas
View all hot water service areas🏷️ Brand – Stiebel Eltron
🔢 Model Number –
📦 Volume – 18L
📏 Width – 225mm
📐 Height – 466mm
🌍 Manufactured In – Germany
🛠️ Cylinder / Heat Exchange Material –
🛡️ Cylinder / Heat-Exchange Warranty – 7 Years
🔇 Noise Level – dBa
⚖️ Dry Weight – kg
⚡ Energy Source –
📡 WiFi Controller Built-in or Compatible –
⏲️ Built-In Timer –
💡 LED/LCD Status Indicator – Yes
📊 Coefficient of Performance (COP) –
3 PHASE INSTANT ELECTRIC HOT WATER
Stiebel Eltron DHB-E 18 LCD Installation Brisbane & Gold Coast
JR Gas & Water supplies and installs the Stiebel Eltron DHB-E 18 LCD three-phase electric instantaneous water heater across eligible Brisbane, Gold Coast and surrounding South East Queensland service areas.
The DHB-E 18 LCD is an electronically controlled continuous-flow electric water heater that heats water as it passes through the appliance instead of maintaining a large storage cylinder. It can supply one or several draw-off points where the electrical supply, plumbing arrangement and peak hot water demand suit the 19.4kW model.
At a 415V supply, the current DHB-E 18 LCD is rated at 19.4kW and approximately 27A per phase. It combines Stiebel Eltron's electronic 3i control with an LCD temperature display, direct 20–60°C adjustment and a compact 466 × 225 × 116mm wall-mounted design.
Stiebel Eltron DHB-E 18 LCD at a glance: article 236748 is a three-phase instantaneous electric water heater rated at 19.4kW and approximately 27A per phase at 415V. It switches on from 2.5L/min, provides 20–60°C temperature selection and can serve one or several suitable outlets. Stiebel Eltron's Queensland sizing guide uses approximately 15L/min at a 19°C temperature rise as a reference one-shower-plus-one-basin mixed-water application.
PRODUCT AT A GLANCE
Stiebel Eltron DHB-E 18 LCD Continuous Flow Electric Hot Water
19.4kW at 415V
A mid-range three-phase instantaneous electric system for correctly sized bathroom, kitchen and multi-point applications.
27A Per Phase
Requires suitable three-phase capacity, dedicated electrical protection and appropriately sized fixed wiring.
20–60°C Control
Direct temperature adjustment through the LCD interface in precise 1°C increments.
Multi-Point Capability
Stiebel Eltron specifies the DHB-E LCD for one or several suitable draw-off points.
WHO IT SUITS
Is the DHB-E 18 LCD Right for Your Property?
The DHB-E 18 LCD sits between the smaller DHB-E 13 and larger DHB-E 27 models. It is best suited where the property has adequate three-phase capacity and the required flow falls within what a 19.4kW heater can produce at the local incoming-water temperature.
Single-Shower Applications
Stiebel Eltron's Queensland selection guide uses the 18kW model as a reference for approximately one shower plus one basin under its stated mixed-water assumptions.
Apartments & Compact Homes
Can suit selected apartments, townhouses and smaller properties where a compact tankless system is preferred and simultaneous demand remains realistic.
Like-for-Like Replacement
A practical candidate where an existing comparable three-phase instantaneous heater is already installed and its electrical and plumbing services remain suitable.
JR Installer Verdict: the DHB-E 18 LCD is a stronger fit for moderate demand than for unrestricted multi-shower use. Choose it around the required litres per minute and temperature rise, not simply because the property has three-phase power.
HOW IT WORKS
How Does the DHB-E 18 LCD Work?
The appliance has almost no stored hot water. Instead, it detects flow and applies high electrical heating power directly to the water while the hot tap is open.
Flow Starts
Once water flow reaches approximately 2.5L/min, the water heater can switch on automatically.
Water Is Heated
The bare-wire electric heating system transfers energy directly into the flowing water.
3i Control Regulates Output
Electronic control monitors operating conditions to help maintain the selected temperature within the appliance's available heating capacity.
No tank to empty does not mean unlimited flow. The heater can continue operating while water and electricity are available, but its ability to raise water to the selected temperature remains limited by its 19.4kW output.
VERIFIED FEATURES
Key Features of the Stiebel Eltron DHB-E 18 LCD
19.4kW rated output at 415V for three-phase instantaneous electric applications.
Electronic 3i control for regulated water heating and temperature delivery.
LCD temperature display for straightforward day-to-day operation.
20–60°C adjustable setting in 1°C increments.
Bare-wire heating system suitable for hard and soft water areas within manufacturer limits.
2.5L/min switch-on flow before the heating system activates.
One or several outlet capability where the total demand is correctly matched to the heater.
Pre-heated water up to 55°C accepted for suitable system designs.
Compact 116mm depth for space-conscious wall installation.
No flue or combustion ventilation because the system is entirely electric.
No conventional storage cylinder or large tank footprint.
Made in Germany according to Stiebel Eltron's current Australian product data.
REAL-WORLD PERFORMANCE
DHB-E 18 LCD Flow Rate & Temperature Rise
The performance of an instantaneous heater is determined by the relationship between water flow and required temperature rise. As more litres pass through the appliance each minute, the maximum temperature rise falls.
| 6L/min | Approximately 46°C temperature rise at 415V |
|---|---|
| 8L/min | Approximately 34°C temperature rise at 415V |
| 10L/min | Approximately 27°C temperature rise at 415V |
| 12L/min | Approximately 23°C temperature rise at 415V |
| 14L/min | Approximately 19°C temperature rise at 415V |
Brisbane manufacturer reference: Stiebel Eltron uses approximately 18°C as a seasonal-average cold-water temperature for Brisbane in its technical guidance. Actual incoming temperature varies by property and season.
SHOWER PERFORMANCE
Can the DHB-E 18 LCD Run a Shower?
Yes, when the installation conditions suit it. Stiebel Eltron's Queensland selection guide uses the DHB-E 18 LCD at approximately 15L/min with a 19°C temperature rise as a reference for one mixed shower plus one basin.
One Shower
A normal shower can be a suitable application where incoming-water temperature and shower flow remain within the heater's available output.
Shower Plus Light Basin Use
The manufacturer uses one shower plus one basin as a reference mixed-water application under Queensland sizing conditions.
Two High-Flow Showers
For stronger simultaneous bathroom demand, the DHB-E 27 LCD or another hot water technology should be assessed rather than assuming the 18 model will maintain full performance.
The sizing guide is guidance, not a universal promise. Flow settings, seasonal inlet temperature, supply voltage, pipework and simultaneous usage can all change the result.
TEMPERATURE CONTROL
20–60°C LCD Temperature Selection
The DHB-E 18 LCD allows direct outlet-temperature selection from 20°C to 60°C using the rotary control and LCD display.
1°C Adjustment
Temperature can be selected in 1°C increments for more precise control than a basic mechanically controlled heater.
Kitchen Applications
The DHB-E LCD range can provide higher appliance temperatures for appropriate kitchen applications.
Bathroom Applications
Bathroom installations need the complete system to provide appropriate delivery-temperature control, including a suitable TMV where required.
A 60°C appliance setting does not mean 60°C water should be delivered to every fixture. Personal-hygiene outlets must comply with the applicable delivery-temperature requirements of the complete plumbing installation.
TECHNICAL DETAILS
Stiebel Eltron DHB-E 18 LCD Specifications
| Brand | Stiebel Eltron |
|---|---|
| Model | DHB-E 18 LCD AU |
| Article Number | 236748 |
| System Type | Electronically controlled electric instantaneous / continuous-flow water heater |
| Electrical Supply | Three phase, 3/PE |
| Rated Voltage | 380 / 400 / 415V |
| Rated Output at 380V | 16.2kW |
| Rated Output at 400V | 18kW |
| Rated Output at 415V | 19.4kW |
| Rated Current at 380V | 24.7A per phase |
| Rated Current at 400V | 26A per phase |
| Rated Current at 415V | 27A per phase |
| Manufacturer Fuse / Protection Data | 25A at 380–400V / 32A at 415V; final circuit design must follow current installation requirements |
| Temperature Range | Off / 20–60°C |
| Minimum Switch-On Flow | 2.5L/min |
| Maximum Permissible Pressure | 1000kPa |
| Maximum Inlet Temperature for Reheating | 55°C |
| Water Connections | G 1/2 A |
| Heating System | Bare-wire heating element |
| Specific Water Resistance Requirement | ≥ 900 Ω.cm at 15°C |
| Maximum Water Conductivity | ≤ 1111 μS/cm at 15°C |
| Height | 466mm |
| Width | 225mm |
| Depth | 116mm |
| Weight | Approximately 2.9kg |
| IP Rating | IP25 |
| Colour | White |
| Approval | WaterMark WMKA00301 / AS3498 |
| Manufacturer Domestic Warranty | 7 years full parts and labour, subject to Stiebel Eltron's current Australian warranty conditions |
Why is the model called “18” when output is 19.4kW? DHB-E 18 LCD is the product designation. Its actual rated output varies with supply voltage and reaches 19.4kW at 415V.
MODEL COMPARISON
DHB-E 13 LCD vs 18 LCD vs 27 LCD
| Specification | DHB-E 13 LCD | DHB-E 18 LCD | DHB-E 27 LCD |
|---|---|---|---|
| Article Number | 236747 | 236748 | 236749 |
| Output at 415V | 14.5kW | 19.4kW | 28kW |
| Current at 415V | 20A/phase | 27A/phase | 38.9A/phase |
| Manufacturer Protection Data | 20A | 32A | 40A |
| Switch-On Flow | 2.5L/min | 2.5L/min | 2.5L/min |
| Temperature Range | 20–60°C | 20–60°C | 20–60°C |
| QLD Reference Direction | Lower-demand applications | Approximately one shower plus one basin mixed | Higher-demand / two-shower reference conditions |
Select by demand and electrical capacity together. Moving from the 18 to the 27 model gives significantly greater flow potential, but it also increases the electrical load from approximately 27A to 38.9A per phase at 415V.
INSTALLATION REQUIREMENTS
What Is Required to Install a DHB-E 18 LCD?
Suitable three-phase electricity supply with enough available capacity for the water heater and the property's other loads.
Dedicated fixed electrical circuit sized correctly for the appliance, cable route and installation conditions.
Correct protection and isolation in accordance with current electrical requirements and Stiebel Eltron's installation instructions.
Suitable wall-mounting location with appropriate access for installation and future servicing.
Adequate water pressure and flow for the intended fixtures and peak demand.
Suitable hot and cold pipe sizing without unnecessary restrictions that reduce available flow.
Temperature-control provisions where personal-hygiene fixtures are supplied.
Qualified plumbing and electrical installation followed by commissioning and operating checks.
Three-phase power at the property does not automatically mean a 27A-per-phase water heater can be added without upgrades. Existing household loads, main supply capacity, switchboard arrangement and cable route all need to be considered.
INSTALLATION FLEXIBILITY
Where Can the DHB-E 18 LCD Be Installed?
The compact 466 × 225 × 116mm construction makes the unit substantially smaller than a conventional storage cylinder and allows flexible wall-mounted installation where services and electrical requirements permit.
Compact Wall Mounting
The unit has no large storage tank and requires very little wall depth.
Flexible Service Entry
Stiebel Eltron provides in-wall and bottom-entry service connection options for suitable installations.
No Safe Tray, Flue or Ventilation
Stiebel Eltron's Australian product data states that no conventional safe tray, gas flue or combustion ventilation is required for this instantaneous electric appliance.
Location still needs assessment. Wet-area electrical requirements, access, service clearances and pipe routing still determine whether a proposed mounting position is suitable.
PRE-HEATED WATER
Can the DHB-E 18 LCD Accept Pre-Heated Water?
Yes. Stiebel Eltron specifies a maximum incoming temperature of 55°C for reheating.
Solar Pre-Heat
The appliance can form part of selected pre-heated water arrangements where the complete system is correctly designed.
Lower Required Temperature Rise
Warmer inlet water means the electric heater has less additional temperature rise to produce.
55°C Maximum Inlet
The incoming pre-heated water must remain within Stiebel Eltron's specified maximum temperature.
JR INSTALLATION
What's Included With DHB-E 18 LCD Installation?
JR's live installation selector above shows the current installation packages for this product. The correct package depends on the condition of the existing electrical circuit, switchboard, plumbing, mounting position and system being replaced.
Water Heater Supply
Supply of the Stiebel Eltron DHB-E 18 LCD as part of the applicable selected installation package.
Plumbing Installation
Connection to suitable existing or modified water services within the selected package scope.
Electrical Installation
Connection to suitable existing three-phase infrastructure or additional electrical work according to the selected package.
Testing & Commissioning
The completed water heater is tested and commissioned before being returned to normal use.
Base installation is for suitable compliant like-for-like work. JR's current live product page states that the Base pathway may suit an exact instant-electric replacement where the existing installation is already compliant and no alterations are required.
CURRENT INSTALLED PRICING
How Much Does DHB-E 18 LCD Installation Cost?
Current supplied-and-installed pricing is shown in the live installation selector above. JR uses multiple instant-electric installation packages because electrical and plumbing requirements can vary significantly between properties.
Like-for-Like Replacement
Replacing a comparable three-phase instantaneous heater can be relatively straightforward when its existing services remain suitable.
Electrical Modifications
New cabling, safety protection, switchboard changes or electrical extensions increase the installation scope.
New Circuit or Relocation
Converting from another hot water type or moving the appliance can require substantially more work than a direct replacement.
Check Current DHB-E 18 LCD Installed Pricing
Use the live package selector above to confirm JR's current installed total, package inclusions and available installation timeframe.
REPLACEMENT COMPATIBILITY
Can the DHB-E 18 LCD Replace My Existing Hot Water System?
Existing 3 Phase Instant Electric
Usually the simplest pathway where the existing circuit capacity, plumbing and mounting location suit the new unit.
Different Instant-Electric Model
Electrical current, protection, cable requirements and pipe connections can differ between manufacturers, so even an instant-for-instant change requires checking.
Storage or Gas Conversion
Changing from electric storage, heat pump or gas can require substantially different electrical and plumbing infrastructure.
Check the electrical pathway first. Where significant switchboard or supply upgrades are required, it can be worth comparing electric storage or heat pump hot water before committing to instantaneous electric.
BRISBANE INSTALLATION
Stiebel Eltron DHB-E 18 LCD Installation Brisbane
JR Gas & Water supplies and installs the Stiebel Eltron DHB-E 18 LCD across eligible Brisbane service areas where the property's three-phase supply and hot water demand suit the system.
Stiebel Eltron uses approximately 18°C as a seasonal-average cold-water reference for Brisbane in its Australian technical material. Warmer inlet water reduces the temperature rise required to reach a normal shower temperature, which can improve the usable flow available from a fixed 19.4kW heating output.
The 18 model can be particularly relevant for apartments, compact homes, secondary bathrooms and like-for-like instant-electric replacements where one-shower-class demand is the primary requirement.
GOLD COAST INSTALLATION
Stiebel Eltron DHB-E 18 LCD Installation Gold Coast
JR Gas & Water provides DHB-E 18 LCD installation across eligible Gold Coast service areas for suitable properties with adequate three-phase electrical capacity.
For a property already using a comparable instantaneous electric heater, replacement can be relatively direct where the electrical circuit, plumbing and mounting location remain suitable.
Where the household expects heavier simultaneous hot water use, JR can compare the DHB-E 27 LCD or alternative storage and heat pump options before the installation pathway is selected.
WARRANTY & OWNERSHIP
Stiebel Eltron DHB-E 18 LCD Warranty
Stiebel Eltron currently advertises a 7-year full parts and labour domestic warranty for the DHB-E LCD range, subject to its current Australian warranty terms and conditions.
Correct installation remains important. The unit needs to be installed and operated in accordance with Stiebel Eltron's electrical, plumbing, water-quality and commissioning requirements.
JR's current DHB-E 18 LCD page also identifies the product as Lifetime Warranty eligible through JR. JR-specific warranty coverage is separate from Stiebel Eltron's manufacturer warranty and remains subject to JR's applicable terms.
COMMON QUESTIONS
Stiebel Eltron DHB-E 18 LCD FAQs
Is the DHB-E 18 LCD instant or storage hot water?
It is an electric instantaneous or continuous-flow water heater. It heats water as it passes through the unit and does not use a conventional storage cylinder.
Does the DHB-E 18 LCD require three-phase power?
Yes. It is a three-phase appliance. At 415V, Stiebel Eltron specifies approximately 27A per phase.
How powerful is the DHB-E 18 LCD?
At 415V the unit is rated at 19.4kW. Stiebel Eltron lists 18kW at 400V and 16.2kW at 380V.
Why is it called the DHB-E 18 if it produces 19.4kW?
DHB-E 18 LCD is the model designation. Actual rated output changes with supply voltage and reaches 19.4kW at 415V.
How many amps does it use?
Stiebel Eltron lists approximately 24.7A per phase at 380V, 26A at 400V and 27A at 415V.
What flow is required to switch the heater on?
The current manufacturer specification lists a 2.5L/min minimum switch-on flow.
Can the DHB-E 18 LCD run a shower?
Yes in suitable conditions. Stiebel Eltron's Queensland selection guide uses the 18 model as a reference for one mixed shower plus one basin at approximately 15L/min and a 19°C temperature rise.
Can it run two showers at once?
The 18 model should not automatically be treated as a two-shower system. Stiebel Eltron uses the larger DHB-E 27 LCD for its two-shower Queensland reference condition.
What temperature rise does it provide at 10L/min?
Stiebel Eltron lists approximately a 27°C temperature rise at 10L/min and 415V.
What temperature rise does it provide at 12L/min?
The current technical datasheet lists approximately a 23°C temperature rise at 12L/min and 415V.
Can the DHB-E 18 supply several outlets?
Yes. Stiebel Eltron specifies the range for one or several draw-off points, but the combined flow must remain within the unit's heating capacity.
What temperature can I select?
The DHB-E LCD allows temperature selection from 20°C to 60°C in 1°C increments.
Can it be used for bathroom hot water?
Yes in an appropriately designed installation. Personal-hygiene fixtures need suitable downstream delivery-temperature control where required.
Can it accept pre-heated water?
Yes. Stiebel Eltron specifies a maximum incoming temperature of 55°C for reheating applications.
Is it suitable for hard water?
Stiebel Eltron describes the bare-wire heating system as suitable for hard and soft water areas, subject to the manufacturer's specified water-quality limits.
What are the dimensions?
The DHB-E 18 LCD measures approximately 466mm high, 225mm wide and 116mm deep and weighs approximately 2.9kg.
What is the difference between the DHB-E 18 and DHB-E 27?
At 415V, the DHB-E 18 produces 19.4kW and draws about 27A per phase, while the DHB-E 27 produces 28kW and draws about 38.9A per phase. The 27 provides substantially more heating capacity for higher simultaneous demand.
How much does DHB-E 18 LCD installation cost?
Current supplied-and-installed pricing is shown in JR's live selector above. The final package depends on whether the installation is a compliant like-for-like replacement or requires electrical, plumbing or relocation work.
Can JR install the DHB-E 18 LCD in Brisbane?
Yes. JR Gas & Water installs suitable three-phase instantaneous electric water heaters across eligible Brisbane and surrounding South East Queensland service areas.
Can JR install the DHB-E 18 LCD on the Gold Coast?
Yes. Installation is available across eligible Gold Coast areas where the electrical supply, plumbing and expected hot water demand suit the model.
Is same-day installation available?
JR's current live product page lists same-day installation availability on suitable jobs. Installations requiring new circuits, switchboard work or major plumbing changes can require a broader installation package.
READY TO INSTALL
Install the Stiebel Eltron DHB-E 18 LCD With JR Gas & Water
The Stiebel Eltron DHB-E 18 LCD is a compact three-phase instantaneous electric option for properties where moderate on-demand hot water requirements and the available electrical capacity align with a 19.4kW system.
Use the live installation selector above to compare current JR packages, installed pricing and availability. If you are unsure whether 19.4kW provides enough flow for your household or whether the property's three-phase supply has sufficient available capacity, use JR's quote or assessment pathway before booking.
Gas continuous flow hot water systems provide hot water on demand, heating water only as it passes through the appliance. With no storage tank, these systems are highly efficient and can provide an endless supply of hot water when correctly sized and maintained.
Like any gas appliance, regular maintenance is recommended to ensure safe operation, maintain peak efficiency and support your manufacturer's warranty.
Homeowner Maintenance – Every 6 Months
Every six months we recommend carrying out a simple visual inspection of your continuous flow hot water system.
Homeowners should:
- Check for water leaks around the unit and pipework.
- Ensure the gas supply is turned on.
- Keep the area around the appliance free from leaves, dirt and debris.
- Ensure the air intake and flue terminal remain unobstructed.
- Inspect visible pipework for corrosion or damage.
- Listen for unusual noises during operation.
- Confirm the unit is producing hot water at the correct temperature.
Why is this important?
Gas continuous flow systems rely on unrestricted airflow and proper gas combustion to operate safely and efficiently.
Blocked vents, debris, water leaks or damaged pipework can reduce performance, increase gas consumption and potentially lead to system faults.
Regular visual inspections help identify problems before they become expensive repairs.
JR 6-Month Gas Continuous Flow Health Check
Recommended Service – $99
Our professional inspection helps ensure your gas continuous flow hot water system continues operating safely and efficiently.
Our technician will:
- Inspect the complete hot water unit.
- Check for water leaks and corrosion.
- Inspect gas pipework and fittings.
- Perform a gas leak test.
- Check burner operation.
- Inspect ignition performance.
- Check heat exchanger condition.
- Inspect the flue and air intake.
- Test water temperature and flow.
- Inspect electrical connections and controller operation (where fitted).
- Check isolation valves and filters.
- Identify components showing signs of wear.
Service Price: $99
Routine inspections help maximise efficiency, reduce operating costs and minimise the likelihood of unexpected breakdowns.
If Your Hot Water System Isn't Working
Before arranging a service, check the following:
- Ensure the gas supply is turned on.
- Check whether other gas appliances in your home are operating.
- Confirm the electrical power is switched on, as most continuous flow systems require electricity for ignition and controls.
- Check the circuit breaker or isolation switch.
- Ensure there is adequate water flow, as the unit will not ignite below its minimum operating flow rate.
- Check the controller for any error codes (where fitted).
- Ensure the air intake and flue terminal are free from obstructions.
- Look for any visible water leaks.
If your system still isn't producing hot water, contact JR Gas & Water for professional diagnosis and repair.
General Signs Your System May Need Attention
Arrange a service if you notice:
- No hot water.
- Fluctuating water temperatures.
- Water not reaching the selected temperature.
- Error codes displayed on the controller.
- Reduced water flow.
- Water leaking from the unit.
- Unusual burner or fan noises.
- Visible corrosion.
- Higher than normal gas consumption.
- Ignition failures or repeated shutdowns.
Early servicing can often prevent costly repairs and keep your hot water system operating reliably.
Protect Your Warranty & Maximise System Life
Routine maintenance helps keep your gas continuous flow hot water system operating safely, efficiently and reliably.
Following the manufacturer's recommended maintenance schedule may also assist in maintaining warranty coverage.
Failure to maintain your system may result in:
- Reduced heating efficiency.
- Increased gas consumption.
- Ignition or burner faults.
- Heat exchanger damage.
- Unexpected loss of hot water.
- Shortened component lifespan.
- Possible reduction or loss of manufacturer warranty, depending on the manufacturer's maintenance requirements.
Preventative maintenance is a cost-effective way to protect your investment, maintain efficient operation and maximise the life of your gas continuous flow hot water system.
Please note: Maintenance requirements vary between manufacturers and models. Always refer to your owner's manual for the maintenance schedule applicable to your gas continuous flow hot water system. JR Gas & Water services all major gas continuous flow hot water brands in accordance with manufacturer recommendations where applicable.
If you're in Queensland and considering a new electric hot water system, JR Gas & Water is the company to choose. Here's why:
Experience and Expertise: JR Gas & Water has over 10 years of experience in the gas and plumbing industry. Their team of licensed and insured professionals is highly skilled and knowledgeable about all aspects of electric hot water system installation, maintenance, and repair. They can provide expert advice on the best system for your needs and ensure a smooth installation process.
Quality Products: JR Gas & Water uses only high-quality products from trusted brands to ensure your electric hot water system is reliable and efficient. They also offer a range of options to suit different budgets and requirements.
Competitive Pricing: JR Gas & Water offers competitive pricing for their electric hot water systems, ensuring that you get a great value for your investment. They also provide a detailed quote upfront, so there are no surprises or hidden costs.
Customer Service: JR Gas & Water is committed to providing excellent customer service. They are always available to answer any questions or concerns you may have and are committed to ensuring your satisfaction.
Local Business: JR Gas & Water is a locally owned and operated business in Queensland. By choosing them for your electric hot water installation, you are supporting a local business and contributing to the local economy.
Warranty and Guarantee: JR Gas & Water provides a warranty and guarantee on all their products and services, giving you peace of mind knowing that your system is covered in case of any issues.
Energy Efficiency: Electric hot water systems can be energy efficient, and JR Gas & Water can help you choose the right system for your needs. They can provide advice on energy-saving features and options, such as timers and thermostats, to help you save on your energy bills.
Safety: JR Gas & Water is committed to safety and ensuring that all installations are done to the highest safety standards. They are also familiar with local safety regulations and requirements, ensuring that your electric hot water system is installed safely and in compliance with all relevant codes.
JR Gas & Water is a reliable and experienced choice for your electric hot water system installation in Queensland. With a commitment to quality products, competitive pricing, excellent customer service, and safety, they can help you make the switch to a more efficient and cost-effective solution for your hot water needs. Contact them today to learn more about their services and how they can help you.