Bidet Toilet Seat Supplied and Fitted

Non-Electric Bidet Toilet Seat Installation

Upgrade your existing toilet with a simple water-powered bidet toilet seat, professionally supplied and installed by JR Gas & Water.

This style of bidet seat connects directly to the toilet's existing cold-water supply and requires no electrical connection.

It provides separate rear and feminine wash functions using retractable spray nozzles and is suitable for many standard toilet pans.

Important: Right-Hand Water Inlet

For standard installation, the toilet water supply connection must be located on the right-hand side of the toilet when standing in front of and facing the toilet.

If the existing water point is located on the opposite side or requires alteration, additional plumbing work may be required.

What's Included?

Standard supply and installation includes:

• Bidet toilet seat and lid

• Removal of the existing toilet seat

• Installation of the bidet mounting plate

• Installation of the supplied tee adaptor

• Connection to the existing toilet cold-water supply

• Connection of the bidet water hose

• Reconnection of the toilet cistern water supply

• Adjustment and alignment of the seat

• Testing of rear and feminine wash functions

• Leak testing of disturbed water connections

• Basic clean-up of the immediate work area

Bidet Seat Features

Water Powered

The bidet operates using the existing cold-water supply.

No power point or electrical connection is required.

Rear & Feminine Wash

Separate spray functions are provided for:

• Rear wash

• Feminine wash

Water flow and spray intensity are controlled from the side-mounted control.

Retractable Spray Nozzles

The spray nozzles retract when not in use and are designed to remain protected inside the seat assembly.

Soft-Close Seat & Lid

The bidet includes a soft-close toilet seat and lid for quieter everyday operation.

Quick-Release Seat

The seat can be removed from its mounting plate to make cleaning around the toilet pan and mounting area easier.

Product Specifications

Does My Toilet Suit This Bidet Seat?

Standard installation requires:

• A compatible toilet pan

• Suitable toilet seat mounting holes

• Adequate clearance around the seat

• An accessible cold-water connection

• A suitable mini stop or isolation valve

• Water connection on the right-hand side of the toilet

• Suitable existing plumbing

• Compliance with applicable plumbing and backflow requirements

Some toilet shapes, concealed-cistern toilets and unusually positioned water connections may require additional work or may not be suitable.

Backflow Protection

Bidet installations must comply with applicable Australian plumbing and backflow requirements.

Depending on the existing plumbing arrangement, additional backflow protection or plumbing alterations may be required.

Any additional work required will be identified before proceeding where reasonably possible.

Existing Mini Stop & Flexi Hose

The bidet connects into the existing toilet cistern water supply.

The existing:

• Mini stop tap

• Toilet flexi hose

• Water point

• Pipework

• Connections

must be suitable for reuse.

If any existing components are leaking, seized, corroded or damaged, replacement may be required.

Optional Plumbing Upgrades

While installing the bidet seat, JR Gas & Water can also replace or upgrade:

• Toilet mini stop tap

• Toilet flexi hose

• Flood stop isolation valve

This can be worthwhile where the existing fittings are older or showing signs of deterioration.

What's Not Included?

Standard installation does not include:

• Relocation of the existing water point

• Running new water pipework

• Wall or tile alterations

• Toilet pan replacement

• Cistern replacement

• Rectification of damaged pipework

• Electrical work

• Additional backflow equipment where required

• Replacement of unsuitable mini stops

• Replacement of unsuitable flexi hoses

• Rectification of unrelated plumbing defects

Additional work may be quoted where required.

Cleaning & Maintenance

The bidet seat should be cleaned using mild, non-abrasive cleaning products.

Avoid harsh chemicals, abrasive cleaners and products that may damage the seat, nozzles or seals.

The connecting hose and fittings should also be inspected periodically for signs of wear, corrosion or deterioration.

Frequently Asked Questions

Does this bidet seat need electricity?

No. It operates using water pressure from the existing toilet cold-water supply.

Does it provide hot water?

No. This model connects to the existing cold-water supply.

Does it have separate wash functions?

Yes. It provides separate rear and feminine wash functions.

Which side does the water connection need to be on?

For standard installation, the water supply must be on the right-hand side of the toilet when standing in front of and facing the toilet.

If the water point is positioned elsewhere, additional plumbing alterations may be required.

Can you install it on any toilet?

No. Toilet pan shape, mounting position, clearance and water-point location all affect compatibility.

Can you replace the mini stop at the same time?

Yes. The mini stop, toilet flexi hose or flood stop valve can also be replaced where required.

Do I need a plumber to install it?

Bidet installations must comply with applicable plumbing and backflow requirements, so professional installation is recommended.