JR GAS & WATER INSTALLER ASSESSMENT
Our Electric Instantaneous Hot Water Installer Verdict
This is the part of the product page we consider most important. It is our assessment of the product from the installer's side: construction, mounting, water connections, electrical integration and ongoing support, rather than a repeat of the specification sheet.
--/100
JR GAS & WATER LOCAL INSTALLATION
Local Hot Water Installation Areas
View all hot water service areas🏷️ Brand – Rinnai
🔢 Model Number –
📦 Volume – 5L
📏 Width – 227mm
📐 Height – 471mm
🌍 Manufactured In – China
🛠️ Cylinder / Heat Exchange Material –
🛡️ Cylinder / Heat-Exchange Warranty – 5 Years
🔇 Noise Level – dBa
⚖️ Dry Weight – kg
⚡ Energy Source –
📡 WiFi Controller Built-in or Compatible –
⏲️ Built-In Timer –
💡 LED/LCD Status Indicator – Yes
📊 Coefficient of Performance (COP) –
3 PHASE INSTANT ELECTRIC HOT WATER
Rinnai Efinity 14kW Installation Brisbane & Gold Coast
JR Gas & Water supplies and installs the Rinnai Efinity 14kW Electric Continuous Flow Hot Water System across eligible Brisbane, Gold Coast and surrounding South East Queensland service areas.
The Rinnai Efinity 14kW is a compact three-phase instantaneous electric water heater designed to heat water only when it is being used. With no conventional hot water storage cylinder, it can suit apartments, studios, smaller dwellings, offices and other lower-demand installations where indoor space is limited.
Rinnai offers dedicated 50°C and 60°C versions with precise temperature control, adjustable temperature and flow settings, touch-screen operation, a safety-lock function and a low 2.5L/min minimum operating flow.
Rinnai Efinity 14kW at a glance: models ECF14I50 and ECF14I60 use three-phase electricity and measure only 471mm × 227mm × 103mm. At 415V, the system is rated at 14.4kW and approximately 20A per phase. Rinnai publishes 7.3L/min at a 28°C temperature rise and 4.1L/min at a 50°C rise. Rinnai's application guide lists approximately 1 shower, 1 sink and 2 basins under its stated sizing assumptions.
PRODUCT AT A GLANCE
Rinnai Efinity 14kW Electric Continuous Flow
3 Phase Electric
Designed for properties with a suitable three-phase electrical supply and enough available electrical capacity.
Compact Tankless Design
Heats water on demand without a large storage cylinder occupying floor or plant space.
Lower-Demand Model
The smallest-capacity model in Rinnai's Efinity range, intended for lighter hot water applications.
Indoor Installation
Designed for indoor wall-mounted installation with a compact IP25-rated enclosure.
WHO IT SUITS
Is the Rinnai Efinity 14kW Right for Your Property?
The Efinity 14kW is best suited to applications where hot water demand is relatively modest and the benefit of a compact instantaneous system outweighs the need for higher simultaneous flow.
Single-Shower Applications
Rinnai's published application guide includes one 9L/min shower in the 14kW model's reference sizing assumptions.
Apartments & Smaller Dwellings
The compact wall-mounted format can suit apartments, studios, townhouses and smaller homes where storage-tank space is limited.
Office & Light Commercial Use
Can suit selected commercial or office applications where the required outlet flow and electrical supply match the unit's capacity.
JR Installer Verdict: the Efinity 14kW should be treated as a lighter-demand instantaneous system. It can be an excellent fit where demand is modest, but it should not be positioned as an unrestricted multi-shower or large-family hot water system.
RINNAI SIZING GUIDE
What Does “1 Shower, 1 Sink & 2 Basins” Mean?
Rinnai currently lists the Efinity 14kW as ideal for approximately 1 shower, 1 sink and 2 basins. This is a manufacturer sizing guide based on defined operating assumptions rather than a claim that every listed outlet can operate simultaneously at full flow.
Shower Assumption
Rinnai uses a 9L/min shower flow rate in the sizing assumptions published for the Efinity range.
Sink & Basin Assumptions
The guide uses approximately 7.5L/min for sinks and 6L/min for basins when describing application suitability.
Temperature Assumption
The published guide assumes approximately 15°C incoming cold water and 40°C mixed water delivered at the outlet.
Simultaneous use changes performance. If several outlets are opened together, the total flow demand rises. An instantaneous heater still has a fixed electrical heating capacity, so available temperature rise reduces as total water flow increases.
HOW IT WORKS
How Does the Rinnai Efinity 14kW Work?
The Efinity heats water only while hot water is flowing through the unit. There is no conventional storage tank that needs to remain heated between uses.
Water Flow Starts
Once the flow through the unit reaches the 2.5L/min minimum operating rate, the heater can begin operating.
Electric Heating Activates
The three-phase electrical supply powers the internal heating system and transfers energy directly into the moving water.
Temperature Is Regulated
Electronic controls adjust operation to maintain the selected outlet temperature within the heater's available capacity.
“Continuous hot water” does not mean unlimited litres per minute. There is no tank to empty, but the unit still has a maximum rate at which it can raise flowing water to the required temperature.
VERIFIED FEATURES
Key Features of the Rinnai Efinity 14kW
Precise temperature control for consistent outlet-temperature management within the unit's operating capacity.
Adjustable temperature settings through the integrated touch-screen interface.
Adjustable flow settings to suit the intended installation and demand.
Touch-screen display for straightforward user control.
Safety-lock function designed to reduce accidental or unwanted setting changes.
2.5L/min minimum operating flow for lower-flow applications.
Slimline 4.3kg construction for compact indoor wall mounting.
No large storage-cylinder standby loss because water is heated as demand occurs.
50°C & 60°C MODELS
Rinnai Efinity 14kW 50°C vs 60°C
The Efinity 14kW is manufactured in dedicated 50°C and 60°C maximum-temperature versions. The right model depends on the application and complete plumbing design rather than simply choosing the highest available temperature.
| Specification | 14kW 50°C | 14kW 60°C |
|---|---|---|
| Product Code | ECF14I50 | ECF14I60 |
| Temperature Range | 30–50°C | 30–60°C |
| Electrical Supply | 3 Phase / 50Hz | 3 Phase / 50Hz |
| Dimensions | 471 × 227 × 103mm | 471 × 227 × 103mm |
| Primary Difference | Maximum appliance outlet setting of 50°C. | Maximum appliance outlet setting of 60°C. |
The 60°C version is not automatically the preferred option. Water-delivery requirements depend on the outlets being supplied and any downstream temperature-control arrangements required by the installation.
TECHNICAL DETAILS
Rinnai Efinity 14kW Specifications
| Brand | Rinnai |
|---|---|
| Product Range | Efinity Electric Continuous Flow |
| 50°C Product Code | ECF14I50 |
| 60°C Product Code | ECF14I60 |
| System Type | Electric continuous-flow / instantaneous water heater |
| Electrical Supply | 3 Phase / 50Hz |
| Rated Voltage | 380 / 400 / 415V AC |
| Rated Power | 12.1kW at 380V / 13.2kW at 400V / 14.4kW at 415V |
| Rated Current | 18.3A at 380V / 19.1A at 400V / 20A at 415V per phase |
| Flow @ 28°C Temperature Rise | 7.3L/min at 415V |
| Flow @ 50°C Temperature Rise | 4.1L/min at 415V |
| Minimum Operating Flow | 2.5L/min |
| Minimum Water Pressure | 100kPa |
| Maximum Water Pressure | 850kPa |
| Maximum Inlet Temperature | 60°C |
| Water Connections | G 1/2 female or R 1/2 male |
| Height | 471mm |
| Width | 227mm |
| Depth | 103mm |
| Weight | 4.3kg |
| Installation | Indoor only |
| Ingress Protection | IP25 |
| Colour | Euro White |
| Water Resistivity Requirement | ≥ 800 Ω.cm |
| Conductivity Requirement | ≤ 1250 μS/cm |
| Manufacturer Warranty | 5 years residential and 1 year commercial, subject to Rinnai's current warranty terms and conditions |
Why does “14kW” vary in the electrical table? Efinity 14kW is the model family name. Rinnai's published input varies with actual supply voltage, reaching 14.4kW at 415V.
REAL-WORLD FLOW
How Much Hot Water Can the Efinity 14kW Deliver?
Instantaneous electric performance is determined by both flow rate and temperature rise. A single maximum-flow number does not describe every real-world situation.
28°C Temperature Rise
At 415V, Rinnai publishes approximately 7.3L/min where the heater is required to raise water temperature by 28°C.
50°C Temperature Rise
Where a much larger 50°C temperature rise is required, published capacity falls to approximately 4.1L/min at 415V.
Higher Total Demand
Opening additional outlets increases total water flow. If demand exceeds the heater's available capacity, the unit cannot provide the same temperature rise to every litre of water.
Climate helps but does not remove the need for sizing. Warmer Brisbane and Gold Coast incoming water can reduce the required temperature rise compared with colder climates, but actual water temperature, desired outlet setting and peak use still need to be considered.
MODEL COMPARISON
Rinnai Efinity 14kW vs 19kW vs 29kW
| Specification | 14kW | 19kW | 29kW |
|---|---|---|---|
| Rated Power @ 415V | 14.4kW | 19.4kW | 28.5kW |
| Rated Current @ 415V | 20A/phase | 26.9A/phase | 39.6A/phase |
| Flow @ 28°C Rise | 7.3L/min | 9.9L/min | 14.5L/min |
| Flow @ 50°C Rise | 4.1L/min | 5.5L/min | 8.0L/min |
| Rinnai Application Guide* | 1 shower / 1 sink / 2 basins | 1 shower / 2 sinks / 3 basins | 2 showers / 2 sinks / 4 basins |
| Best Direction | Lighter demand and lower electrical load. | Moderate demand with greater flow capacity. | Higher demand where electrical capacity supports the larger load. |
*Rinnai's outlet guide uses manufacturer assumptions including approximately 15°C incoming water, 40°C mixed outlet temperature, 9L/min shower flow, 7.5L/min sink flow and 6L/min basin flow. It is a sizing guide rather than a guarantee of simultaneous maximum flow from every listed outlet.
Choose the smallest model that genuinely meets the demand — not simply the biggest unit available. Higher-capacity Efinity models require materially more electrical current and can create unnecessary electrical upgrade costs where the smaller unit already suits the application.
INSTALLATION REQUIREMENTS
What Is Required to Install a Rinnai Efinity 14kW?
The Efinity 14kW requires a fixed three-phase electrical connection, so electrical suitability should be established before assuming it is a straightforward hot water replacement.
Suitable three-phase supply with adequate spare electrical capacity for the water heater and other property loads.
Dedicated electrical circuit sized correctly for the supply voltage, cable route and installation conditions.
Correct electrical protection and isolation in accordance with applicable electrical requirements and Rinnai instructions.
Suitable indoor mounting location with access for future servicing.
Adequate water pressure and flow for the fixtures the unit is expected to supply.
Suitable water quality within Rinnai's published resistivity and conductivity requirements.
Pressure control where required if the incoming supply exceeds the manufacturer's permitted maximum.
Professional plumbing and electrical installation followed by testing and commissioning.
Three-phase at the meter does not automatically mean the Efinity can be connected as-is. Available supply capacity, switchboard space, protective devices and the existing cable size still need to be assessed.
INSTALLATION LOCATION
Where Can the Rinnai Efinity 14kW Be Installed?
Rinnai specifies the Efinity for indoor installation. Its slim 471mm × 227mm × 103mm housing makes it particularly useful where a conventional storage cylinder would be difficult to accommodate.
Apartment Applications
The compact three-phase design can suit apartments and units where hot water demand is modest and a suitable indoor electrical installation exists.
Near Primary Outlets
Locating the heater reasonably close to the main hot water use can reduce the amount of cooled water sitting in long hot-water pipework.
Accessible Position
The unit still needs appropriate access for installation, electrical isolation, inspection and future servicing.
JR INSTALLATION
What's Included With Rinnai Efinity 14kW Installation?
JR's live installation package selector above shows the current options for this product. The selected package should match the amount of plumbing and electrical work required at the property.
Rinnai Efinity Supply
Supply of the applicable Efinity 14kW water heater as part of the selected installation package.
Plumbing Installation
Connection to suitable existing or modified hot and cold water services according to the selected package.
Electrical Installation
Connection to suitable three-phase electrical services or additional electrical work where included in the selected installation package.
Testing & Commissioning
The completed water heater installation is commissioned and checked for operation before handover.
JR package structure matters: the live JR page currently separates straightforward compliant like-for-like replacement from packages that include plumbing modifications, electrical alterations, a new circuit or system relocation. Select the package that matches the actual installation rather than assuming every job is a base replacement.
CURRENT INSTALLED PRICING
How Much Does Rinnai Efinity 14kW Installation Cost?
Current supplied-and-installed pricing is shown in the live selector above. JR uses different installation packages because the cost of an electric continuous-flow installation depends heavily on the existing electrical and plumbing infrastructure.
Exact Like-for-Like
A compliant replacement of an identical or suitably matched instantaneous unit can require considerably less work where the existing services remain suitable.
Electrical Modifications
New isolation, safety protection, cable extensions or other electrical alterations increase the installation scope.
New Circuit or Relocation
Converting from another hot water technology or moving the heater can require a new three-phase circuit plus additional plumbing work.
Check Current Rinnai Efinity 14kW Installed Pricing
Use the live installation selector above to compare JR's current packages, pricing and available installation dates for your property.
REPLACEMENT COMPATIBILITY
Can the Rinnai Efinity 14kW Replace My Existing Hot Water System?
Potentially. The easiest installation pathway is normally replacing an existing three-phase instantaneous electric system where the current electrical and plumbing services suit the new unit.
Existing Instant Electric
A similar three-phase unit can be the most direct replacement where the existing circuit capacity, plumbing and indoor position remain suitable.
Different Capacity or Brand
A change of model can still require alterations because current draw, cable sizing, flow capability and service connections vary.
Storage System Conversion
Changing from electric storage, heat pump, solar or gas hot water can require substantially more electrical and plumbing work than a direct instantaneous replacement.
Check the electrical upgrade cost before committing. If the property needs significant three-phase or switchboard work, an electric storage or heat pump system may be worth comparing before choosing instantaneous electric.
BRISBANE INSTALLATION
Rinnai Efinity 14kW Installation Brisbane
JR Gas & Water supplies and installs the Rinnai Efinity 14kW across eligible Brisbane service areas for properties where lower-demand instantaneous electric hot water and the existing three-phase infrastructure make sense.
Brisbane's generally warmer water conditions can reduce the temperature rise required compared with colder climates, which can benefit instantaneous electric performance. That does not remove the need to check the actual shower flow, outlet demand and incoming-water conditions for the property.
The 14kW model can be particularly relevant for compact apartments, studios and smaller properties where one primary shower forms part of the demand and a large storage cylinder would be difficult to accommodate.
GOLD COAST INSTALLATION
Rinnai Efinity 14kW Installation Gold Coast
JR Gas & Water provides Rinnai Efinity 14kW installation across eligible Gold Coast service areas for suitable apartments, smaller homes and light-demand applications.
The compact indoor format can be useful where space is limited, but the final decision should still consider total hot water flow, incoming water temperature and the electrical capacity available at the switchboard.
For properties needing stronger simultaneous outlet performance, JR can compare the 19kW and 29kW Efinity models or alternative storage and heat pump options before the system is selected.
WARRANTY & OWNERSHIP
Rinnai Efinity Warranty & Ongoing Ownership
Rinnai currently lists a 5-year residential warranty for the Efinity range, subject to the manufacturer's complete warranty conditions. Commercial applications currently have a one-year manufacturer warranty.
JR's live Efinity 14kW product page also identifies the product as eligible for JR's Lifetime Warranty program. JR Lifetime Warranty eligibility is separate from Rinnai's manufacturer warranty and remains subject to JR's applicable terms.
Correct installation is important for long-term ownership. The water heater should be installed, commissioned and operated in accordance with Rinnai's instructions, including its published electrical, pressure and water-quality requirements.
COMMON QUESTIONS
Rinnai Efinity 14kW FAQs
Is the Rinnai Efinity 14kW instant or storage hot water?
It is an electric continuous-flow or instantaneous water heater. It heats water when required and does not use a conventional hot water storage cylinder.
Does the Rinnai Efinity 14kW require three-phase power?
Yes. Rinnai specifies a three-phase 50Hz electrical supply for the Efinity 14kW range.
How many amps does the Efinity 14kW use?
Rinnai lists approximately 18.3A per phase at 380V, 19.1A at 400V and 20A at 415V.
What flow rate does the Efinity 14kW deliver?
At 415V, Rinnai publishes approximately 7.3L/min at a 28°C temperature rise and 4.1L/min at a 50°C temperature rise. Real performance depends on incoming-water temperature, pressure, supply voltage and the selected outlet temperature.
Can the Efinity 14kW run a shower?
Yes, in appropriately sized conditions. Rinnai's current application guide includes one 9L/min shower in the model's reference application.
Can the Efinity 14kW run two showers at the same time?
The 14kW model should not be treated as a two-shower system. Rinnai positions its larger Efinity models for greater demand, with the 29kW model carrying the manufacturer's two-shower reference application.
What does Rinnai mean by 1 shower, 1 sink and 2 basins?
It is a sizing guide based on Rinnai's published assumptions for incoming water temperature and fixture flow rates. It does not mean every listed outlet can operate simultaneously at maximum flow without affecting performance.
What is the minimum operating flow?
Rinnai specifies a minimum operating flow of 2.5 litres per minute.
Can the Rinnai Efinity 14kW be installed outside?
No. Rinnai specifies the Efinity for indoor installation.
What is the difference between ECF14I50 and ECF14I60?
ECF14I50 operates over a 30–50°C temperature range, while ECF14I60 allows settings from 30–60°C. The correct version depends on the installation and outlets being supplied.
Does the Efinity have a touch-screen controller?
Yes. Rinnai lists touch-screen control, adjustable temperature and flow settings and a safety-lock function as current Efinity features.
Does continuous flow mean the hot water is unlimited?
There is no storage tank to run empty, so heating can continue while the system is operating. However, the unit still has a finite heating capacity, so total water flow needs to remain within what the 14kW system can heat to the required temperature.
Should I choose the Efinity 14kW or 19kW?
The 14kW uses less electrical current and suits lighter demand. The 19kW provides more flow and heating capacity but places a larger load on the electrical supply. The correct choice depends on actual outlet demand rather than simply choosing the larger model.
Should I choose the Efinity 14kW or 29kW?
The 29kW is intended for significantly higher demand and Rinnai lists two showers in its reference application. It also draws almost twice the current per phase of the 14kW model at 415V, so electrical capacity needs to be considered alongside hot water demand.
Can the Efinity 14kW replace another three-phase instantaneous heater?
Potentially. A like-for-like three-phase instant-electric replacement can be relatively straightforward where the existing switchboard capacity, circuit, water services and mounting position suit the Rinnai unit.
How much does Rinnai Efinity 14kW installation cost?
Current supplied-and-installed pricing is shown in JR's live package selector above. Cost varies according to whether the job is a compliant direct replacement or needs plumbing, electrical, circuit or relocation work.
Can JR install a Rinnai Efinity 14kW in Brisbane?
Yes. JR Gas & Water installs suitable three-phase instantaneous electric hot water systems across eligible Brisbane and surrounding South East Queensland service areas.
Can JR install a Rinnai Efinity 14kW on the Gold Coast?
Yes. Rinnai Efinity supply and installation is available across eligible Gold Coast areas where the property's electrical supply, plumbing and hot water demand suit the model.
Is same-day Rinnai Efinity installation available?
JR's live product page currently lists same-day installation availability for suitable jobs. Installations requiring significant electrical, circuit or relocation work may require a broader installation package.
READY TO INSTALL
Install the Rinnai Efinity 14kW With JR Gas & Water
The Rinnai Efinity 14kW is a compact three-phase continuous-flow electric option for lower-demand applications where one primary shower and lighter secondary outlet use suit the system's real heating capacity.
Use the live installation selector above to compare current JR installation packages, pricing and booking availability. If you are unsure whether 14kW provides enough hot water for your property or whether the existing electrical infrastructure is suitable, use the quote or onsite-assessment option before committing to the installation.
Gas continuous flow hot water systems provide hot water on demand, heating water only as it passes through the appliance. With no storage tank, these systems are highly efficient and can provide an endless supply of hot water when correctly sized and maintained.
Like any gas appliance, regular maintenance is recommended to ensure safe operation, maintain peak efficiency and support your manufacturer's warranty.
Homeowner Maintenance – Every 6 Months
Every six months we recommend carrying out a simple visual inspection of your continuous flow hot water system.
Homeowners should:
- Check for water leaks around the unit and pipework.
- Ensure the gas supply is turned on.
- Keep the area around the appliance free from leaves, dirt and debris.
- Ensure the air intake and flue terminal remain unobstructed.
- Inspect visible pipework for corrosion or damage.
- Listen for unusual noises during operation.
- Confirm the unit is producing hot water at the correct temperature.
Why is this important?
Gas continuous flow systems rely on unrestricted airflow and proper gas combustion to operate safely and efficiently.
Blocked vents, debris, water leaks or damaged pipework can reduce performance, increase gas consumption and potentially lead to system faults.
Regular visual inspections help identify problems before they become expensive repairs.
JR 6-Month Gas Continuous Flow Health Check
Recommended Service – $99
Our professional inspection helps ensure your gas continuous flow hot water system continues operating safely and efficiently.
Our technician will:
- Inspect the complete hot water unit.
- Check for water leaks and corrosion.
- Inspect gas pipework and fittings.
- Perform a gas leak test.
- Check burner operation.
- Inspect ignition performance.
- Check heat exchanger condition.
- Inspect the flue and air intake.
- Test water temperature and flow.
- Inspect electrical connections and controller operation (where fitted).
- Check isolation valves and filters.
- Identify components showing signs of wear.
Service Price: $99
Routine inspections help maximise efficiency, reduce operating costs and minimise the likelihood of unexpected breakdowns.
If Your Hot Water System Isn't Working
Before arranging a service, check the following:
- Ensure the gas supply is turned on.
- Check whether other gas appliances in your home are operating.
- Confirm the electrical power is switched on, as most continuous flow systems require electricity for ignition and controls.
- Check the circuit breaker or isolation switch.
- Ensure there is adequate water flow, as the unit will not ignite below its minimum operating flow rate.
- Check the controller for any error codes (where fitted).
- Ensure the air intake and flue terminal are free from obstructions.
- Look for any visible water leaks.
If your system still isn't producing hot water, contact JR Gas & Water for professional diagnosis and repair.
General Signs Your System May Need Attention
Arrange a service if you notice:
- No hot water.
- Fluctuating water temperatures.
- Water not reaching the selected temperature.
- Error codes displayed on the controller.
- Reduced water flow.
- Water leaking from the unit.
- Unusual burner or fan noises.
- Visible corrosion.
- Higher than normal gas consumption.
- Ignition failures or repeated shutdowns.
Early servicing can often prevent costly repairs and keep your hot water system operating reliably.
Protect Your Warranty & Maximise System Life
Routine maintenance helps keep your gas continuous flow hot water system operating safely, efficiently and reliably.
Following the manufacturer's recommended maintenance schedule may also assist in maintaining warranty coverage.
Failure to maintain your system may result in:
- Reduced heating efficiency.
- Increased gas consumption.
- Ignition or burner faults.
- Heat exchanger damage.
- Unexpected loss of hot water.
- Shortened component lifespan.
- Possible reduction or loss of manufacturer warranty, depending on the manufacturer's maintenance requirements.
Preventative maintenance is a cost-effective way to protect your investment, maintain efficient operation and maximise the life of your gas continuous flow hot water system.
Please note: Maintenance requirements vary between manufacturers and models. Always refer to your owner's manual for the maintenance schedule applicable to your gas continuous flow hot water system. JR Gas & Water services all major gas continuous flow hot water brands in accordance with manufacturer recommendations where applicable.
If you're in Queensland and considering a new electric hot water system, JR Gas & Water is the company to choose. Here's why:
Experience and Expertise: JR Gas & Water has over 10 years of experience in the gas and plumbing industry. Their team of licensed and insured professionals is highly skilled and knowledgeable about all aspects of electric hot water system installation, maintenance, and repair. They can provide expert advice on the best system for your needs and ensure a smooth installation process.
Quality Products: JR Gas & Water uses only high-quality products from trusted brands to ensure your electric hot water system is reliable and efficient. They also offer a range of options to suit different budgets and requirements.
Competitive Pricing: JR Gas & Water offers competitive pricing for their electric hot water systems, ensuring that you get a great value for your investment. They also provide a detailed quote upfront, so there are no surprises or hidden costs.
Customer Service: JR Gas & Water is committed to providing excellent customer service. They are always available to answer any questions or concerns you may have and are committed to ensuring your satisfaction.
Local Business: JR Gas & Water is a locally owned and operated business in Queensland. By choosing them for your electric hot water installation, you are supporting a local business and contributing to the local economy.
Warranty and Guarantee: JR Gas & Water provides a warranty and guarantee on all their products and services, giving you peace of mind knowing that your system is covered in case of any issues.
Energy Efficiency: Electric hot water systems can be energy efficient, and JR Gas & Water can help you choose the right system for your needs. They can provide advice on energy-saving features and options, such as timers and thermostats, to help you save on your energy bills.
Safety: JR Gas & Water is committed to safety and ensuring that all installations are done to the highest safety standards. They are also familiar with local safety regulations and requirements, ensuring that your electric hot water system is installed safely and in compliance with all relevant codes.
JR Gas & Water is a reliable and experienced choice for your electric hot water system installation in Queensland. With a commitment to quality products, competitive pricing, excellent customer service, and safety, they can help you make the switch to a more efficient and cost-effective solution for your hot water needs. Contact them today to learn more about their services and how they can help you.