JR GAS & WATER INSTALLER ASSESSMENT
Our Solar Hot Water Installer Verdict
This is the part of the product page we consider most important. It is our assessment of the product from the installer's side: construction, collector and cylinder positioning, solar pipework, boosting, commissioning and ongoing support, rather than a repeat of the specification sheet.
--/100
JR GAS & WATER LOCAL INSTALLATION
Local Hot Water Installation Areas
View all hot water service areas🏷️ Brand – Envirosun
🔢 Model Number – TS300/40
📦 Volume – 300L
📏 Width – 2150mm
📐 Height – 605mm
🌍 Manufactured In –
🛠️ Cylinder / Heat Exchange Material – Stainless Steel
🛡️ Cylinder / Heat-Exchange Warranty – 7 Years
🔇 Noise Level – NA dBa
⚖️Dry Weight – 59kg
⚡ Energy Source – Solar📡 WiFi Controller Built-in or Compatible –
⏲️ Built-In Timer – No
💡 LED/LCD Status Indicator –
📊 Coefficient of Performance (COP) –
ENVIROSUN SOLAR HOT WATER INSTALLATION
Envirosun TS300/40 Installation Brisbane & Gold Coast
JR Gas & Water supplies and installs the Envirosun TS300/40 solar hot water system across eligible Brisbane and Gold Coast service areas. It is a roof-mounted thermosiphon solar hot water system that combines a stainless steel storage tank with two flat-plate solar collectors.
The current Envirosun TS300/40Se provides 304 litres of nominal storage and uses two E20HS solar collectors. It is the two-collector version of Envirosun's 304L TS300 platform, providing the same storage capacity as the TS300/60 but with a smaller roof footprint and one fewer collector.
The TS range uses an open-circuit thermosiphon design. The tank sits above the collectors and heated water circulates naturally through the roof-mounted system without an active solar circulation pump. This makes roof area, structure, access, solar exposure, plumbing and the selected booster arrangement central to the installation.
Envirosun TS300/40 at a glance: The current TS300/40 is a 304L roof-mounted thermosiphon solar hot water system. The electric-boosted TS300/40Se uses two E20HS flat-plate collectors and a 2.4kW electric booster with 140L boost capacity. No pump is required for normal solar circulation. JR Gas & Water supplies and installs the TS300/40 across eligible Brisbane and Gold Coast areas, subject to roof, access, plumbing and installation suitability.
Envirosun TS300/40 Supply & Installation at a Glance
Product Type
Open-circuit roof-mounted thermosiphon solar hot water system.
Storage Capacity
304L nominal storage in Envirosun's current TS300 specification.
Collector Configuration
Two flat-plate solar collectors in the TS300/40 configuration.
Installation Area
Professional supply and installation across eligible Brisbane and Gold Coast service areas.
Who Is the Envirosun TS300/40 Best For?
Medium-to-Large Households
The TS300 platform provides 304L nominal storage and is positioned by Envirosun for medium-to-large household applications. Final sizing should still be based on actual hot water use.
Roof-Mounted Solar Buyers
The tank and collectors are installed together on the roof, making the TS300/40 suitable where a traditional thermosiphon layout is preferred over a split system with a ground-level tank.
Two-Collector Applications
The TS300/40 uses the same 304L storage platform as the TS300/60 but requires less collector area, making it worth considering where two collectors are better matched to the roof and application.
PRODUCT SUITABILITY
Is the Envirosun TS300/40 Right for My Home?
A Good Choice If...
You want roof-mounted thermosiphon solar hot water, have suitable roof space for the tank and two collectors, and prefer a system that uses natural solar circulation rather than an active circulation pump.
Consider Another Option If...
Your roof has limited structural suitability, poor solar exposure, difficult access or insufficient mounting space. A split solar system or heat pump may make more practical sense where keeping the tank on the ground is preferred.
JR Should Check First If...
You are changing from a ground-mounted hot water system, relocating the installation, changing booster type, have unusual roof construction or are unsure whether the existing plumbing and mounting area can be reused.
How Many People Does the Envirosun TS300/40 Suit?
Envirosun describes its TS300 platform as suitable for medium-to-large households and publishes its broader TS range for approximately two to six people depending on model and demand. That should be treated as a range guide rather than a guaranteed occupant rating for every TS300/40 installation.
The TS300/40 provides 304L nominal storage, but actual suitability depends on shower length, shower flow rates, number of bathrooms, bath use, simultaneous demand, dishwasher and laundry habits, available solar energy and how often the booster needs to operate.
JR should therefore match the TS300/40 to the household's real usage pattern rather than relying on tank capacity or occupant count alone.
How Does the Envirosun TS300/40 Work?
The TS300/40 works through natural thermosiphon circulation. The storage tank is mounted above the collectors on the roof. When sunlight heats water in the collectors, the warmer water becomes less dense and rises naturally into the storage tank while cooler water moves downward toward the collectors.
This natural circulation means the system does not require a pump for normal solar operation. The storage tank and collectors form one roof-mounted solar hot water installation.
The operating process is simple: sunlight heats the collectors → heated water rises naturally into the storage tank → cooler water returns to the collectors → hot water is stored for household use → the selected booster provides supplementary heating when solar input is insufficient.
The TS is an open-circuit thermosiphon system, which distinguishes it from Envirosun's closed-circuit THX configuration.
Key Features of the Envirosun TS300/40
304L Nominal Storage
The current TS300 platform provides 304L nominal hot water storage.
Two Solar Collectors
The electric TS300/40Se uses two E20HS flat-plate collectors, providing a smaller roof footprint than the three-collector TS300/60Se.
No Solar Circulation Pump
Natural thermosiphon circulation moves heated water through the solar system without a pump for normal solar operation.
444 Grade Stainless Steel Tank
Envirosun specifies premium grade 444 ferritic stainless steel tank construction for its current TS range.
Electric or Gas Boosting
Current TS300/40 configurations include electric and gas-boosted versions, allowing backup heating to be matched to the available property services.
STC Eligible
Envirosun's solar systems are Clean Energy Regulator accredited and may create Small-scale Technology Certificates where applicable scheme requirements are met.
Envirosun TS300/40 Specifications
| Specification | Details |
|---|---|
| Brand | Envirosun |
| Electric Model | TS300/40Se |
| Gas Model | TS300/40Sg |
| Product Type | Open-circuit thermosiphon solar hot water system |
| Nominal Storage | 304L |
| Installation Type | Roof-mounted tank and collectors |
| Electric Tank Model | TS300/O/E24/S2 |
| Tank Material | Grade 444 ferritic stainless steel |
| Tank Footprint | 650 × 2,150mm |
| Tank Height | 600mm |
| Tank Empty Mass | 59kg |
| Tank Full Mass | 363kg |
| Electric Collectors | 2 × E20HS |
| Collector Footprint | 1,235 × 2,000mm each |
| Collector Height | 70mm each |
| Collector Empty Mass | 27.5kg each |
| Collector Full Mass | 29.2kg each |
| Electric System Footprint | 2,238 × 2,600mm |
| Electric System Empty Mass | 129kg |
| Electric System Full Mass | 437kg |
| Electric Boost Capacity | 140L |
| Electric Booster | 2.4kW |
| Electric CER Code | TS300/40/O/E24/S2/E20HS |
| Gas Boost Rate | Up to 26L/min |
| Gas Consumption | 188MJ/hr |
| Gas Heat Output | 42kW |
| Gas System Empty Mass | 149kg |
| Gas System Full Mass | 458kg |
| Gas CER Code | TS300/40/O/GR26/S2/E20HS |
Important: the current Envirosun specification lists the TS300/40 at 304L nominal storage. The TS300 model name should not be interpreted as an exact published 300L capacity. The electric and gas-boosted systems also have different complete-system weights and booster requirements.
INSTALLATION REQUIREMENTS
What Is Required to Install the Envirosun TS300/40?
The TS300/40 installs both the 304L storage tank and solar collectors on the roof. Roof suitability is therefore a fundamental installation requirement rather than simply an aesthetic consideration.
Sufficient usable roof area for the complete system
Appropriate roof structure and mounting conditions
Suitable roof pitch and solar exposure
Safe installer access
Safe lifting and positioning of roof-mounted equipment
Suitable hot and cold water pipework
Required pressure and safety valves
Compliant relief and drainage arrangements
Suitable electric or gas booster services
Tempering where required
Practical access for future servicing
Licensed installation and commissioning
Roof height, construction, pitch, access, system relocation, existing services and booster changes can affect the installation package and final cost.
What's Included With Envirosun TS300/40 Installation?
Standard Installation
The selected JR installation package covers the applicable labour and materials described in the live product selector. Depending on the package, this may include removal of the existing hot water system, roof positioning, plumbing alterations, applicable valves and connection of the selected booster arrangement.
Compliance & Commissioning
The system is connected, checked and commissioned for correct operation, including hot and cold water connections, safety components, thermosiphon operation and the electric or gas booster where applicable.
Possible Additional Work
Difficult roof access, specialised lifting, structural work, relocation, extended pipe runs, gas alterations, electrical upgrades or non-standard mounting arrangements can require additional work or a separate quote.
How Much Does Envirosun TS300/40 Installation Cost?
Current Envirosun TS300/40 supplied-and-installed pricing is shown in the live product and installation selector above. Keeping the current price in the commercial product area means customers see the latest product price and relevant installation-package options rather than an outdated hard-coded figure.
Final TS300/40 installation cost depends on roof height, access, lifting requirements, replacement type, existing plumbing, valves, electric or gas booster services, relocation and any mounting or structural work required at the property.
A straightforward replacement of a compatible roof-mounted thermosiphon system can require less alteration than changing from a heat pump, ground-mounted electric storage or active split solar installation.
BRISBANE INSTALLATION
Envirosun TS300/40 Installation Brisbane
JR Gas & Water supplies and installs the Envirosun TS300/40 across eligible Brisbane service areas. For an existing roof-mounted solar replacement, JR can assess whether the existing mounting area, plumbing and booster services can be reused or need alteration for the new system.
The two-collector TS300/40 requires less roof area than the three-collector TS300/60, which can make it the more practical 304L Envirosun thermosiphon option where roof width or usable collector area is limited.
For Brisbane properties converting from ground-mounted electric storage, heat pump or active split solar, the installation requires additional planning because both the 304L tank and collectors move onto the roof. JR also services eligible surrounding areas including Logan, Ipswich, Moreton Bay and Redlands.
GOLD COAST INSTALLATION
Envirosun TS300/40 Installation Gold Coast
Gold Coast TS300/40 installations require a suitable roof position that provides practical solar exposure while remaining accessible for installation and future service work. The combined roof-mounted tank and collector layout needs to suit the property rather than simply replacing another system on tank capacity alone.
Where an existing thermosiphon solar system is being replaced, suitable pipework and service positions may sometimes be retained. Renovations, relocations and conversions from another hot water technology can require more significant plumbing and booster changes.
The two-collector layout can also be worth considering where a TS300/60's third collector would add unnecessary roof footprint for the application.
Can the Envirosun TS300/40 Replace My Existing System?
Replacing Roof-Mounted Solar
This is generally the closest replacement pathway, but roof condition, mounting area, plumbing, access, valves and booster compatibility still need to be confirmed.
Replacing a Smaller Thermosiphon System
Moving to the 304L TS300/40 can increase storage and roof-mounted system size, so the existing mounting area and supporting installation conditions need to suit the larger system.
Replacing Split Solar or Heat Pump
Split solar and heat pump systems normally keep storage at ground level. Changing to a TS300/40 moves storage onto the roof and can require substantial plumbing and mounting alterations.
Replacing Another Brand
The previous brand is less important than the roof area, system dimensions, mounting conditions, plumbing, booster services and safe access. Similar tank capacities do not automatically make two systems like-for-like replacements.
Which Envirosun TS300/40 Variant Do I Need?
Envirosun currently publishes electric and gas-boosted TS300/40 configurations. Both are roof-mounted thermosiphon solar systems using 304L storage, but their backup heating and service requirements differ.
| Feature | TS300/40Se | TS300/40Sg |
|---|---|---|
| Storage Capacity | 304L | 304L |
| Solar Operation | Thermosiphon | Thermosiphon |
| Boost Type | Electric | Gas |
| Electric Booster | 2.4kW | Not applicable |
| Electric Boost Capacity | 140L | Not applicable |
| Gas Boost Rate | Not applicable | Up to 26L/min |
| Gas Consumption | Not applicable | 188MJ/hr |
| Gas Heat Output | Not applicable | 42kW |
| Best Suited To | Properties suited to electric backup heating | Properties with appropriate gas services |
Existing services matter when selecting the variant. Changing between electric and gas boosting can require additional trade work and should not automatically be treated as a standard like-for-like replacement.
How Efficient Is the Envirosun TS300/40?
The TS300/40 is designed to use solar energy as its primary water-heating source whenever useful solar input is available. The booster provides supplementary heating when solar contribution alone does not meet household demand.
Actual purchased-energy use depends on roof orientation, shading, weather, season, household consumption, inlet water temperature and booster operation. A fixed running-cost or percentage-saving figure cannot accurately represent every installation.
The system may also create STCs where current scheme requirements are met. Certificate quantities and values depend on installation date and geographic location, so the current applicable benefit should be reflected through live product pricing rather than hard-coded into this page.
TS300/40 vs TS300/60 Solar Hot Water
| Feature | TS300/40Se | TS300/60Se |
|---|---|---|
| Nominal Storage | 304L | 304L |
| Collector Quantity | 2 | 3 |
| Collector Model | E20HS | E20HS |
| System Footprint | 2,238 × 2,600mm | 3,260 × 2,600mm |
| System Empty Mass | 129kg | 144kg |
| System Full Mass | 437kg | 453kg |
| Electric Boost Capacity | 140L | 140L |
| Electric Booster | 2.4kW | 2.4kW |
| Main Difference | Two-collector configuration | Three-collector configuration |
The TS300/60 does not provide a larger tank than the TS300/40. Both use 304L nominal storage. The main difference is collector quantity and roof footprint, so the choice should be based on available roof area and the value of the additional collector rather than assumed extra storage capacity.
TS300/40 vs THX300/40 Solar Hot Water
| Feature | TS300/40 | THX300/40 |
|---|---|---|
| Storage Class | 304L | 304L |
| Installation Type | Roof-mounted thermosiphon | Roof-mounted thermosiphon |
| Solar Circuit | Open circuit | Indirect closed circuit |
| Solar Pump Required | No | No |
| Freeze Protection | Standard TS configuration | Closed-circuit configuration designed for frost-prone applications |
| Collector Fouling Protection | Household water circulates through the solar circuit | Collectors isolated from normal household water by the closed solar circuit |
| Primary Reason to Consider | Straightforward open-circuit thermosiphon solar | Additional freeze and water-quality protection |
For many Brisbane and Gold Coast properties, the open-circuit TS300/40 can provide a straightforward thermosiphon solar solution. The THX becomes more relevant where the additional protection of an indirect closed solar circuit is specifically useful.
COMMON QUESTIONS
Envirosun TS300/40 Installation FAQs
How much does Envirosun TS300/40 installation cost?
Current supplied-and-installed pricing is shown in the live product selector above. Final cost depends on roof access, lifting requirements, mounting conditions, existing plumbing, valves, booster type, relocation and any non-standard installation work.
Can JR install the Envirosun TS300/40 in Brisbane?
Yes. JR supplies and installs the TS300/40 across eligible Brisbane service areas where the roof, access, plumbing and selected booster configuration are suitable.
Can JR install the Envirosun TS300/40 on the Gold Coast?
Yes. TS300/40 installation is available across eligible Gold Coast service areas subject to suitable roof space, mounting conditions, access and property services.
Is the Envirosun TS300/40 a 300L system?
The model belongs to Envirosun's TS300 family, but the current manufacturer specification lists nominal storage capacity as 304L.
How many solar collectors does the TS300/40 use?
The current electric-boosted TS300/40Se uses two E20HS flat-plate collectors.
Does the TS300/40 need a solar circulation pump?
No. Normal solar circulation occurs naturally through the thermosiphon effect, so no active circulation pump is required.
What is the difference between the TS300/40 and TS300/60?
Both provide 304L nominal storage. The TS300/40 has two collectors while the TS300/60 has three, making collector quantity and roof footprint the main differences.
What is the difference between the TS300/40 and THX300/40?
The TS300/40 is an open-circuit thermosiphon system. The THX300/40 uses an indirect closed solar circuit designed to provide additional freeze and collector-fouling protection.
Can I choose electric or gas boosting?
Envirosun currently publishes both electric and gas-boosted TS300/40 configurations. The right version depends on available property services and the installation requirements.
Can the TS300/40 replace another brand of solar hot water system?
Potentially, yes. Suitability depends on roof space, system dimensions, mounting conditions, plumbing, booster services and safe access rather than brand alone.
Can the TS300/40 replace a heat pump or electric storage system?
It can on a suitable property, but the conversion is more involved because the storage tank and collectors need to be installed on the roof and connected to the home's existing water and booster services.
What happens if my roof does not suit the TS300/40?
A split solar system or another hot water technology may be more suitable. Active split solar keeps the storage tank at ground level, while a heat pump avoids roof-mounted solar collectors altogether.
Envirosun TS300/40 Warranty and Maintenance
Manufacturer Warranty
Envirosun currently provides a 10-year product warranty and 2-year labour warranty for qualifying residential original owner-occupiers for eligible systems purchased from 26 June 2026, subject to the manufacturer's current terms, exclusions and geographic conditions.
JR Lifetime Warranty Eligibility
The current JR TS300/40 product listing identifies the system as Lifetime Warranty eligible. JR warranty coverage is separate from the Envirosun manufacturer warranty and remains subject to JR's applicable warranty terms.
Ongoing Maintenance
The roof-mounted storage tank, collectors, valves, booster and associated plumbing should remain accessible for servicing and be maintained in accordance with current Envirosun installation, service and warranty requirements.
Why Choose JR Gas & Water for Envirosun TS300/40 Installation?
Roof-mounted solar hot water is installation-led. The system needs a suitable roof position, safe access, appropriate mounting, correct plumbing and properly configured backup heating to provide the intended result.
JR Gas & Water supplies and installs hot water systems throughout Brisbane, the Gold Coast and eligible surrounding South East Queensland service areas. With the TS300/40, JR can assess both household hot water demand and whether the property genuinely suits a 304L roof-mounted thermosiphon system.
The objective is not simply to sell the largest available solar product. It is to match the storage, collector configuration and installation method to the property.
COMPARE YOUR OPTIONS
Compare Solar Hot Water Systems & Installation Options
Compare the TS300/40 with larger collector configurations, closed-circuit THX solar and active split solar before choosing the final replacement. Storage capacity, roof area, collector quantity, booster type and installation complexity can all influence the correct choice.
Use the current JR main navigation to compare the available Hot Water Systems, Solar Hot Water Systems and Envirosun hot water options.
READY TO INSTALL
Install the Envirosun TS300/40 With JR Gas & Water
The Envirosun TS300/40 combines 304L nominal storage with a compact two-collector thermosiphon layout. Its key advantage compared with the TS300/60 is achieving the same storage capacity with less collector area and a smaller overall roof footprint.
Before installation, the key checks are roof structure, available mounting area, solar exposure, safe access, lifting requirements, plumbing and the selected booster arrangement. Where the property fits JR's online installation conditions, choose the appropriate package through the live product selector above. More complex replacements, relocations and technology conversions can follow JR's quote pathway.
Solar hot water systems are an efficient and environmentally friendly way to heat your water, using energy from the sun to reduce electricity or gas consumption. To continue operating efficiently and reliably, they require regular maintenance and servicing.
Like any hot water system, manufacturers recommend routine maintenance to maximise system performance, protect key components and support your manufacturer's warranty.
Homeowner Maintenance – Every 6 Months
Every six months we recommend carrying out a simple visual inspection of your solar hot water system.
Homeowners should:
- Carefully operate the Pressure & Temperature Relief (PTR) Valve.
- Operate the Expansion Control Valve (ECV) (where fitted).
- Check for water leaks around the storage tank and pipework.
- Inspect visible solar pipe insulation for deterioration.
- Ensure solar collectors are free from excessive dirt, leaves and debris where safely accessible.
- Check for signs of corrosion or rust.
- Listen for unusual noises from the system or circulating pump (where fitted).
Why is this important?
Regular operation of the PTR and ECV valves helps prevent mineral build-up that can cause the valves to seize or leak.
Keeping collectors and surrounding components clean allows the solar system to operate as efficiently as possible, while early detection of leaks or damaged insulation can prevent larger problems from developing.
Important: Always follow your manufacturer's instructions when operating safety valves, as hot water will discharge during testing. Do not climb onto your roof to inspect or clean collectors. If you're unsure, contact a licensed plumber.
JR 6-Month Solar Hot Water Health Check
Recommended Service – $99
Our professional inspection helps ensure your solar hot water system continues operating safely and efficiently while identifying issues before they become costly repairs.
Our technician will:
- Inspect the complete hot water system.
- Check for leaks and corrosion.
- Test the PTR valve.
- Test the ECV (where fitted).
- Inspect exposed solar pipework and insulation.
- Check storage tank condition.
- Inspect booster operation (electric or gas).
- Check circulating pump operation (where fitted).
- Inspect controller operation (where applicable).
- Confirm system heating performance.
- Inspect valves, fittings and pipework.
- Identify components showing signs of wear.
Service Price: $99
Routine inspections help maximise solar efficiency, reduce energy costs and minimise the likelihood of unexpected breakdowns.
Recommended 5-Year Major Service
Current Price: $449
Most solar storage hot water systems benefit from scheduled replacement of key components to maintain reliable performance and extend the life of the storage tank.
Our comprehensive 5-Year Service includes:
- Replacement of the sacrificial anode (where fitted).
- Replacement of the Pressure & Temperature Relief (PTR) Valve.
- Replacement of the Expansion Control Valve (ECV).
- Inspection of the solar collectors.
- Inspection of solar pipework and insulation.
- Inspection of circulating pump and controller (where fitted).
- Inspection of booster operation.
- Full operational testing.
- Leak and corrosion inspection.
Why These Components Matter
Sacrificial Anode
Most vitreous enamel-lined solar storage tanks contain a sacrificial anode.
The anode gradually corrodes instead of the steel storage tank, protecting it from internal rust. Once the anode has been consumed, the tank itself begins to corrode, which can eventually lead to leaks and tank failure.
Replacing the anode at the recommended interval is one of the best ways to extend the life of your hot water system.
Pressure & Temperature Relief (PTR) Valve
The PTR valve protects the storage tank by safely relieving excessive pressure and temperature.
Mineral deposits and normal wear can prevent the valve from operating correctly over time, making routine testing and replacement essential.
Expansion Control Valve (ECV)
Where fitted, the ECV controls pressure created as water expands during heating.
Maintaining the ECV helps reduce stress on the storage tank and plumbing system, contributing to a longer service life.
Solar Collectors & Pipework
Solar collectors capture the sun's energy to heat water, while insulated pipework transfers that heat to the storage tank.
Keeping collectors unobstructed and ensuring pipe insulation remains in good condition helps:
- Maximise solar efficiency.
- Reduce reliance on electric or gas boosting.
- Lower energy costs.
- Improve overall system performance.
If Your Hot Water System Isn't Working
Before arranging a service, check the following:
- Ensure power is switched on (for electric boosted systems).
- Confirm the gas supply is on (for gas boosted systems).
- Check circuit breakers and safety switches where applicable.
- Verify the booster has not been turned off.
- Inspect for visible water leaks.
- Ensure exposed solar pipe insulation has not been damaged.
- Check for controller fault codes (where fitted).
- Listen for unusual noises from the circulating pump (where fitted).
- Remember that several cloudy days may reduce solar heating, causing the booster to operate more frequently.
If your system is still not producing adequate hot water, contact JR Gas & Water for professional diagnosis and repair.
General Signs Your System May Need Attention
Arrange a service if you notice:
- Reduced hot water availability.
- Booster operating more frequently than usual.
- Water leaking from the tank or pipework.
- Constant dripping from relief valves.
- Visible corrosion.
- Damaged or deteriorated pipe insulation.
- Pump noise or failure (where fitted).
- Controller fault codes.
- Rust-coloured or dirty water.
- Unusual noises during operation.
Early servicing can often prevent more expensive repairs and extend the life of your solar hot water system.
Protect Your Warranty & Maximise System Life
Routine maintenance helps ensure your solar hot water system continues operating safely, efficiently and reliably.
Following the manufacturer's recommended maintenance schedule may also assist in maintaining warranty coverage.
Failure to maintain your system may result in:
- Premature tank corrosion.
- Reduced solar efficiency.
- Higher electricity or gas consumption.
- Leaking or seized safety valves.
- Unexpected loss of hot water.
- Shortened system lifespan.
- Possible reduction or loss of manufacturer warranty, depending on the manufacturer's maintenance requirements.
Preventative maintenance is one of the best ways to protect your investment, reduce operating costs and maximise the life of your solar hot water system.
Please note: Maintenance requirements vary between manufacturers and models. Always refer to your owner's manual for the maintenance schedule applicable to your solar hot water system. JR Gas & Water services all major solar hot water brands in accordance with manufacturer recommendations where applicable.
If you're in Queensland and considering a heat pump hot water system, look no further than JR Gas & Water. Here's why:
Experience and Expertise: JR Gas & Water has over 10 years of experience in the gas and plumbing industry. Their team of licensed and insured professionals is highly skilled and knowledgeable about all aspects of heat pump installation, maintenance, and repair. They can provide expert advice on the best system for your needs and ensure a smooth installation process.
Quality Products: JR Gas & Water uses only high-quality products from trusted brands to ensure your heat pump hot water system is reliable and efficient. They also offer a range of options to suit different budgets and requirements.
Competitive Pricing: JR Gas & Water offers competitive pricing for their heat pump hot water systems, ensuring that you get a great value for your investment. They also provide a detailed quote upfront, so there are no surprises or hidden costs.
Customer Service: JR Gas & Water is committed to providing excellent customer service. They are always available to answer any questions or concerns you may have and are committed to ensuring your satisfaction.
Local Business: JR Gas & Water is a locally owned and operated business in Queensland. By choosing them for your heat pump hot water installation, you are supporting a local business and contributing to the local economy.
Warranty and Guarantee: JR Gas & Water provides a warranty and guarantee on all their products and services, giving you peace of mind knowing that your system is covered in case of any issues.
Sustainable and Environmentally Friendly: Heat pump hot water systems are a sustainable and environmentally friendly option for heating water. They use renewable energy sources, such as air or ground heat, to heat water, resulting in lower greenhouse gas emissions and reduced energy bills. JR Gas & Water can help you make the switch to a more sustainable and cost-effective solution for your hot water needs.
Recently viewed