Bianco INOX60S2NXT 62L/min Pressure Pump with NXT Controller Supplied & Installed - Plumbing - Pump
Bianco INOX90S2NXT 78L/min Pressure Pump with NXT Controller Supplied & Installed - Plumbing - Pump
Bianco INOX60S2NXT 62L/min Pressure Pump with NXT Controller Supplied & Installed - Plumbing - Pump
Bianco INOX90S2NXT 78L/min Pressure Pump with NXT Controller Supplied & Installed - Plumbing - Pump
Award Winning
2023–2025 ProductReview.com.au Winners
Product Protection
Lifetime Warranty Eligible
Live Availability
Same Day Installation Available 365 Days
Trusted Locally
1000+ 5-Star Google Installation Reviews

Bianco INOX60S2NXT Supplied & Installed

Quick Specs & Benefits View flow rate, performance and product specifications
  • Brand: Bianco
  • Model: INOX60S2NXT
  • Made In: China
  • Flow Rate: 62 L/min
  • Maximum Simultaneous Taps: 4
  • kW: 0.6
  • Electrical Connection Type: Single phase, 220-240 V ~, 50 Hz
  • LCD/LED Status Indicator: Yes
  • Minimum/Maximum Pressure: 441 kPa
  • WiFi Controller Built In or Compatible: No
  • Warranty: 2 Years
  • Width: 205 mm
  • Height: 405 mm
Recommended

Silver Package

2 of 3
From ...
GET A QUOTE

Select Your Preferred Install

Choose an exact installation date, or stay flexible and save.
BIANCO PRESSURE PUMP INSTALLATION

Bianco INOX60S2NXT 0.6kW Pressure Pump Installation Brisbane & Gold Coast

JR Gas & Water supplies and installs the Bianco INOX60S2NXT 0.6kW pressure pump across eligible Brisbane, Gold Coast and surrounding South East Queensland service areas.

The current BIA-INOX60S2NXT is a stainless-steel surface-mounted jet pressure pump supplied with Bianco's nXt CORE digital pressure controller. It is designed for clean-water pressure boosting, tank-water supply, suction-well applications, gardening and suitable domestic water-supply duties.

The system combines a 0.6kW / 0.8hp pump with automatic pressure control, dry-run protection, automatic restart, frequent-start protection and adjustable pressure-start control.

Bianco INOX60S2NXT at a glance: current BIA-INOX60S2NXT / order code 808394, 0.6kW, 62 L/min maximum flow, 45m maximum head, 441kPa / 4.4 bar maximum hydraulic rating, 240V single phase, 4A pump current, 1" BSP female inlet, 1" BSP male outlet, up to approximately 6 taps, nXt CORE digital pressure controller and current 24-month Australian product warranty.

Bianco INOX60S2NXT Supply & Installation at a Glance

Maximum Flow

Up to approximately 62 L/min under low-head conditions.

Maximum Head

Up to approximately 45 metres of water head.

nXt CORE Controller

Automatic pressure control with adjustable start pressure, dry-run protection and restart logic.

Domestic Sizing Guide

White International positions the system at up to approximately 6 taps, while JR uses a more conservative four-simultaneous-tap guide.

What Is the Bianco INOX60S2NXT?

The Bianco INOX60S2NXT is a surface-mounted clean-water pressure system built around a stainless-steel jet pump and the nXt CORE digital controller.

The pump is designed to create useful domestic water pressure from suitable clean-water sources such as tanks, suction wells and other storage systems.

The controller automates pump operation. When system pressure drops to the configured starting point, the controller starts the pump. When water demand ends and flow stops, the controller shuts the pump down automatically.

This makes the system substantially more practical for normal household pressure duty than a basic manually operated transfer pump.

Why Choose the Bianco INOX60S2NXT?

62 L/min Maximum Flow

The INOX60S2NXT provides useful flow capacity for lighter to moderate residential pressure applications.

45m Maximum Head

The pump can develop up to approximately 45 metres of head at the low-flow end of its hydraulic curve.

Digital Pressure Control

The nXt CORE controller manages automatic pump starting and stopping according to pressure and flow demand.

Dry-Run Protection

The controller protects the pump against loss of usable inlet water and provides automatic restart logic.

Frequent-Start Protection

Anti-cycle logic helps protect the pump where abnormal rapid starting occurs.

Drinking-Water Approval

White International identifies the system as approved for drinking-water applications.

What Can the Bianco INOX60S2NXT Be Used For?

White International positions the INOX60S2NXT for water supply, suction-well use, domestic pressure boosting, agricultural applications and gardening.

Rainwater Tank Supply

The pump can provide automatic pressure from a suitable clean rainwater or storage tank where suction plumbing is properly designed.

Domestic Pressure Supply

It can support smaller to medium household pressure demand where the required flow and pressure fit its hydraulic performance.

Garden & Light Irrigation

The pump can suit garden taps and suitable light-irrigation applications where water demand remains within the pump curve.

PRODUCT SUITABILITY

Is the Bianco INOX60S2NXT Right for My Property?

A Good Choice If...

You need a moderate-capacity domestic pressure pump with intelligent automatic control for tank water, garden supply or general household use.

Compare the INOX90 If...

Your property has greater simultaneous demand, more outlets or needs additional hydraulic capacity beyond the 62 L/min INOX60 platform.

JR Should Check First If...

You have long suction pipework, significant lift from the water source, undersized pipes, weak source flow, direct mains boosting or unusually high simultaneous demand.

How Many Taps Can the Bianco INOX60S2NXT Supply?

White International currently positions the INOX60S2NXT at up to approximately six taps.

JR's live installed-product page uses a more conservative guide of approximately four simultaneous taps.

Both figures should be treated as application guides rather than guarantees that every outlet can operate at maximum flow at the same time.

Actual performance depends on fixture flow rates, elevation, suction conditions, pipe diameter and the pressure required at each outlet.

The safest sizing method is to compare the property's peak flow and pressure requirement against the pump curve.

Maximum Flow vs Maximum Pressure

The INOX60S2NXT is rated at approximately 62 L/min maximum flow and 45m maximum head.

Those two maximum values do not occur together.

Maximum head occurs at very low or zero flow. As flow demand rises, available pressure falls.

Likewise, the 62 L/min headline figure occurs toward the low-pressure end of the hydraulic curve.

The pump should therefore not be represented as delivering 62 L/min at 441kPa.

nXt CORE Intelligent Controller

The nXt CORE controller is one of the main reasons the INOX60S2NXT functions as a complete pressure system rather than simply a pump.

The controller is a single-pump digital pressure controller rated for up to approximately 10A / 1.5kW single-phase pump load.

Adjustable Start Pressure

The default starting pressure is approximately 2.2 bar / 220kPa and can be adjusted by the user or installer.

Stop on No Flow

The controller switches the pump off when water demand ends and flow falls away.

Dry-Run Protection

The controller protects the pump where water supply is lost and includes automatic restart behaviour.

Frequent-Start Protection

Anti-cycle logic is designed to protect the pump from abnormal repeated starting.

Flexible Orientation

White International states the CORE controller can be installed in any orientation.

Fixed Accumulator

The CORE controller incorporates a fixed accumulator as part of its pressure-management design.

Bianco INOX60S2NXT Specifications

Brand Bianco Pumpz
Current Model BIA-INOX60S2NXT
Australian Order Code 808394
Product Type Stainless-steel surface-mounted jet pressure system
Controller Bianco nXt CORE digital pressure controller
Pump Power 0.6kW / 600W
Horsepower Approx. 0.8hp
Electrical Supply 240V single phase
Pump Current Approx. 4A
Maximum Flow 62 L/min
Maximum Head 45m
Maximum Pressure Equivalent Approx. 441kPa / 4.4 bar
Inlet Connection 1" BSP female
Outlet Connection 1" BSP male
Suitable Liquid Clean water
Drinking-Water Approval Yes
Distributor Tap Guide Up to approx. 6 taps
JR Live Tap Guide Up to approx. 4 simultaneous taps
Controller Modes Single pressure-control mode
Default Start Pressure Approx. 2.2 bar / 220kPa
Start Pressure Adjustment Yes
Stop Logic Stops when flow falls to no-flow condition
Dry-Run Protection Yes
Automatic Restart Yes
Frequent-Start Protection Yes
Controller Maximum Load 10A / 1.5kW single phase
Controller Protection Rating IP65
Controller Connection Plug and play
Controller Union Size 1"
Wi-Fi No
Variable Speed No
Current Australian Warranty 24 months

White International's page title still uses INOX60S2NXT while one internal product-code field currently displays INOX60CORE. The Australian order code 808394 and the hydraulic specification clearly identify the current 0.6kW INOX60 pressure-system package.

Jet Pump Design

The INOX60 platform uses a surface-mounted jet-pump design.

This style of pump can draw water from below pump level where the suction installation remains within the pump's practical capability.

Suction performance depends heavily on vertical lift, pipe diameter, horizontal pipe distance, fittings and whether the suction line is fully airtight.

This is why a jet pump that performs well in a short tank connection can behave very differently when connected to a long or restrictive suction line.

Dry-Run Protection and Automatic Restart

Loss of water supply is a common risk with surface pumps drawing from tanks and suction sources.

If the water level drops or the suction line loses prime, the nXt CORE controller can protect the pump against continued normal operation without water.

The automatic restart function allows the controller to attempt recovery when usable water supply returns.

This protection is valuable, but it does not replace proper priming, correctly designed suction pipework or maintaining sufficient water in the source tank.

Tank Water, Suction Well or Pressure Boosting

Tank-Water Supply

The INOX60S2NXT can provide automatic pressure from a suitable clean-water or rainwater tank.

Suction-Well Applications

White International specifically identifies suction-well use as an application for this pressure-pump platform.

Pressure Boosting

The system can boost suitable low-pressure clean-water supplies where the source provides enough flow and the installation complies with applicable requirements.

A pump can increase pressure, but it cannot compensate indefinitely for a water source that does not provide enough volume for the property's peak demand.

Bianco INOX45 vs INOX60 vs INOX90

Specification INOX45S2NXT INOX60S2NXT INOX90CORE
Pump Class 0.45kW 0.6kW 0.75kW
Maximum Flow Approx. 58 L/min 62 L/min 78 L/min
Maximum Head Lower than INOX60 45m 50m
Distributor Tap Guide Light domestic / garden duty Up to approx. 6 taps Up to approx. 7 taps
Main Positioning Gardening and lighter demand Small to medium domestic demand Greater domestic flow demand

The INOX60S2NXT therefore sits naturally between the lighter INOX45 and higher-capacity INOX90 options. JR currently describes it as the practical middle choice for smaller to medium homes and moderate outdoor use.

INSTALLATION REQUIREMENTS

What Is Required to Install the Bianco INOX60S2NXT?

Suitable clean-water source
Correct suction-pipe sizing
Airtight suction plumbing where drawing from below pump level
Suitable delivery pipework
1" inlet and outlet connection planning
Correct isolation valves
Non-return or backflow protection where required
Suitable 240V electrical supply
Stable surface-mounted pump location
Weather protection appropriate to the installation
Pump correctly primed before initial operation
Controller start pressure set to suit the property

Pipe Sizing Matters

The INOX60S2NXT uses 1-inch inlet and outlet connections, but the surrounding pipework still needs to support the required water flow.

Restrictive suction plumbing can reduce available flow, make priming more difficult and contribute to poor pump performance.

Long delivery runs, small pipe diameter, restrictive valves, fittings and elevation all consume some of the pump's available head.

A larger pump cannot fully compensate for fundamentally undersized or poorly designed plumbing.

JR therefore checks the water source and surrounding pipework as part of pump selection.

What's Included With Bianco INOX60S2NXT Installation?

Standard Replacement

Where the property qualifies for the selected JR package, installation can include supply of the genuine INOX60S2NXT system, removal of the existing pump where included and connection to suitable existing services.

Controller Setup & Commissioning

The pump is primed where required, the nXt CORE controller is configured, pressure operation is tested and the system is commissioned for normal use.

Possible Additional Work

Suction-pipe changes, delivery pipework alterations, valves, backflow protection, electrical adjustments, mounting improvements or pressure-related accessories can increase installation scope.

How Much Does Bianco INOX60S2NXT Installation Cost?

Current supplied-and-installed pricing is shown through JR's live product and installation selector above.

The final Bianco INOX60S2NXT installation cost depends on whether the job is a straightforward like-for-like replacement or requires alterations to suction plumbing, delivery pipework, valves, power supply, mounting or backflow protection.

A direct replacement using suitable existing services is generally simpler than a completely new suction installation or pressure-boosting system.

JR's live product currently lists the INOX60S2NXT as an active supplied-and-installed pump option.

BRISBANE INSTALLATION

Bianco INOX60S2NXT Installation Brisbane

JR Gas & Water supplies and installs the Bianco INOX60S2NXT in Brisbane for suitable tank-water, suction-source, garden and household pressure-pump applications.

The 0.6kW platform sits between Bianco's smaller INOX45 and larger INOX90 systems, making it particularly relevant to smaller and medium-size properties with moderate water-pressure demand.

JR checks the water source, suction conditions, pipe sizing, available flow, required pressure and controller setup before confirming the final installation.

Eligible service coverage extends across Greater Brisbane and surrounding areas including Logan, Ipswich, Redlands and Moreton Bay.

GOLD COAST INSTALLATION

Bianco INOX60S2NXT Installation Gold Coast

JR Gas & Water also supplies and installs the Bianco INOX60S2NXT on the Gold Coast across eligible service areas.

The combination of moderate hydraulic capacity and nXt CORE intelligent protection can make it a useful choice where a basic small pump is too limited but a larger high-flow system would be unnecessary.

JR assesses the water source, pipe layout, available power and expected peak demand before commissioning the pump.

This helps ensure the system is matched to the property rather than selected solely from the headline litres-per-minute figure.

Can the Bianco INOX60S2NXT Replace My Existing Pump?

Replacing Another INOX60

Usually a straightforward pathway where existing services, pipework and mounting remain suitable.

Replacing a Smaller Pump

The 62 L/min maximum-flow platform may provide additional capacity, but source flow and pipework still need to support the upgrade.

Replacing a Basic Jet Pump

Often possible and adds the protection and control features of the nXt CORE controller.

New Rainwater Tank Supply

Requires properly sized suction pipework, suitable power, isolation and correct pump priming.

Suction-Well Supply

Requires the water level, suction lift and pipework to remain within the practical operating capability of the pump.

Higher-Demand Upgrade

Where greater flow is required, the larger INOX90 or another appropriately sized pressure system should be compared.

COMMON QUESTIONS

Bianco INOX60S2NXT Installation FAQs

What is the current Bianco INOX60S2NXT model?

The current Australian product is BIA-INOX60S2NXT, order code 808394.

How much water can the INOX60S2NXT pump?

White International publishes a maximum flow of approximately 62 L/min.

What is the maximum head?

The current Australian specification publishes approximately 45 metres maximum head.

What pressure is 45m of head?

White International publishes approximately 441kPa / 4.4 bar.

Does it deliver 62 L/min at 441kPa?

No. Maximum flow and maximum head occur at different operating points. Pressure falls as flow demand rises.

How powerful is the pump?

The INOX60S2NXT uses a 0.6kW / 600W / approximately 0.8hp pump.

How much current does it draw?

White International publishes approximately 4A.

What power supply does it require?

The system uses approximately 240V single-phase power.

What size pipe connections does it use?

The pump uses a 1-inch BSP female inlet and 1-inch BSP male outlet.

What controller does the INOX60S2NXT use?

The current Australian system is supplied with a Bianco nXt CORE digital pump controller.

What is the controller cut-in pressure?

The nXt CORE uses a default start pressure of approximately 2.2 bar / 220kPa, with adjustment available.

How does the controller stop the pump?

The controller stops the pump when water demand ends and system flow reaches its no-flow condition.

Does it have dry-run protection?

Yes. The nXt CORE includes dry-run protection and automatic restart.

Does it have anti-cycle protection?

Yes. White International lists frequent-start protection as a feature of the nXt CORE controller.

What is the controller IP rating?

The nXt CORE is listed as IP65.

Can the controller be installed in different orientations?

Yes. White International states that the CORE controller can be installed in any orientation.

Can it pump drinking water?

Yes. White International identifies the system as having drinking-water approval.

Can it draw water from a rainwater tank?

Yes. It can suit clean tank-water applications where the suction plumbing is correctly designed.

Can it be used for a suction well?

Yes. White International specifically lists suction-well applications among the suitable uses for the system.

How many taps can it supply?

White International currently positions the system for up to approximately six taps. JR's live page uses a more conservative four-simultaneous-tap guide. Actual performance depends on pressure, flow and pipework.

Is the INOX60S2NXT variable speed?

No. The pump itself is fixed speed. The nXt CORE is an intelligent pressure controller, not a variable-frequency drive.

Does the INOX60S2NXT have Wi-Fi?

No. JR's current live product does not identify Wi-Fi control for this model.

What warranty does the INOX60S2NXT have?

White International and JR currently list a 24-month / 2-year product warranty.

Can JR install the INOX60S2NXT in Brisbane or the Gold Coast?

Yes. JR installs suitable water-pressure pump systems across eligible Brisbane, Gold Coast and surrounding South East Queensland service areas.

Bianco INOX60S2NXT Warranty

Australian Product Warranty

White International currently lists the BIA-INOX60S2NXT with a 24-month product warranty.

nXt CORE Controller

The controller forms part of the pressure-system package and warranty claims remain subject to the applicable Australian product terms.

Correct Installation Matters

Clean water, proper priming, correct suction design, stable electrical supply and suitable pipework remain important to reliable pump performance.

Manufacturer/distributor warranty and JR installation warranty are separate. The warranty documentation supplied with the actual Australian product should be used when determining product coverage.

Claims Strengthened or Cleaned Up From the Existing INOX60S2NXT Copy

Added exact BIA-INOX60S2NXT model identification
Added Australian order code 808394
Confirmed 0.6kW / 600W / 0.8hp rating
Confirmed 62 L/min maximum flow
Confirmed 45m maximum head
Added 441kPa / 4.4 bar hydraulic rating
Added verified 4A pump current
Added 1" BSP female inlet and male outlet
Added current six-tap distributor positioning
Qualified JR's four-tap figure as a conservative sizing guide
Added nXt CORE 2.2 bar default adjustable cut-in
Added dry-run protection and automatic restart
Added frequent-start protection
Added IP65 controller rating
Added 10A / 1.5kW controller capacity
Clarified that the pump is fixed speed, not variable speed
Added current 24-month Australian warranty
Removed unsupported claims that cheaper pumps are inherently unreliable

Why Choose JR Gas & Water for Bianco Pump Installation?

JR Gas & Water supplies and installs domestic water-pressure pumps across Brisbane, the Gold Coast and eligible surrounding South East Queensland service areas.

The correct pump depends on more than motor power or headline flow. Water source, suction conditions, inlet pipe diameter, delivery pipework, elevation, simultaneous demand and required outlet pressure all influence the result.

JR assesses the existing setup and property requirements before confirming whether the INOX60S2NXT, INOX90 or another pressure-pump arrangement is the better fit.

COMPARE YOUR OPTIONS

Compare Water Pumps

Water Pumps

Compare JR's current tank-water, rainwater, mains-pressure and variable-speed pressure-pump systems.

READY TO INSTALL

Install the Bianco INOX60S2NXT With JR Gas & Water

The Bianco INOX60S2NXT 0.6kW combines a 62 L/min maximum-flow stainless-steel jet pump with nXt CORE digital pressure control, adjustable cut-in pressure, dry-run protection, automatic restart and frequent-start protection.

Its strongest fit is smaller to medium homes, gardens and tank-water systems needing more capacity than Bianco's lighter pump options without stepping up to the higher-flow INOX90 or a premium variable-speed pressure system.

JR Gas & Water supplies and installs suitable Bianco INOX60S2NXT systems across eligible Brisbane and Gold Coast service areas. Choose the applicable live installation package above, or use JR's quote pathway where the job involves difficult suction conditions, direct mains boosting, substantial pipework changes, electrical alterations or a non-standard water source.

This site is protected by hCaptcha and the hCaptcha Privacy Policy and Terms of Service apply.