Bianco INOX45S2NXT 58L/min Pressure Pump with NXT Controller Supplied & Installed - Plumbing - Pump
Award Winning
2023–2025 ProductReview.com.au Winners
Product Protection
Lifetime Warranty Eligible
Live Availability
Same Day Installation Available 365 Days
Trusted Locally
1000+ 5-Star Google Installation Reviews

Bianco INOX45S2NXT Supplied & Installed

Quick Specs & Benefits View flow rate, performance and product specifications
  • Brand: Bianco
  • Model: INOX45S2NXT
  • Made In: China
  • Flow Rate: 58 L/min
  • Maximum Simultaneous Taps: 3
  • kW: 0.45
  • Electrical Connection Type: Single phase, 220-240 V ~, 50 Hz
  • LCD/LED Status Indicator: Yes
  • Minimum/Maximum Pressure: 392 kPa
  • WiFi Controller Built In or Compatible: No
  • Warranty: 2 Years
  • Width: 180 mm
  • Height: 390 mm
Recommended

Silver Package

2 of 3
From ...
GET A QUOTE

Select Your Preferred Install

Choose an exact installation date, or stay flexible and save.
BIANCO PRESSURE PUMP INSTALLATION

Bianco INOX45CORE 0.45kW Pressure Pump Installation Brisbane & Gold Coast

JR Gas & Water supplies and installs the Bianco INOX45CORE 0.45kW pressure pump across eligible Brisbane, Gold Coast and surrounding South East Queensland service areas.

The current BIA-INOX45CORE, Australian order code 808393, is the smallest stainless-steel jet pressure system in Bianco's current INOX CORE domestic range. Older product material and JR's existing listing may still refer to the system as the INOX45S2NXT, but White International's current October 2026 Australian product guide now identifies the model as INOX45CORE.

The system combines a 0.45kW self-priming stainless-steel jet pump with Bianco's electronic pump controller for automatic starting, stopping and protection against loss of water supply.

Bianco INOX45CORE at a glance: current BIA-INOX45CORE / order code 808393, 0.45kW, 58 L/min maximum flow, 40m maximum head, approximately 392kPa static pressure equivalent, 230V single phase, 3.5A current, up to approximately 6m suction capability, 1" BSP female inlet, 1" BSP male outlet, 2.2 bar adjustable start pressure and current 24-month Australian product warranty.

Bianco INOX45CORE Supply & Installation at a Glance

Maximum Flow

Up to approximately 58 L/min under low-head operating conditions.

Maximum Head

Up to approximately 40 metres of water head.

Automatic Controller

Automatic starting, stopping and restart after power or water loss, with adjustable pressure control.

Light Domestic Duty

White International's current 2026 guide positions the INOX45CORE at approximately 1–2 taps at 10 L/min and 2.5 bar.

What Is the Bianco INOX45CORE?

The Bianco INOX45CORE is a surface-mounted self-priming clean-water pressure system designed for domestic and light-duty applications.

The pump provides the hydraulic pressure while the electronic controller automates normal operation. When system pressure falls to the configured starting point, the controller starts the pump. When water demand ends, it shuts the pump down automatically.

This makes the INOX45CORE better suited to normal household or garden pressure duties than a basic transfer pump that requires separate switching or control equipment.

The current product is the updated version of the pump package previously marketed as INOX45S2NXT.

Why Choose the Bianco INOX45CORE?

58 L/min Maximum Flow

The pump provides useful flow for garden watering, smaller household systems and light domestic pressure applications.

40m Maximum Head

The pump can develop up to approximately 40 metres of water head toward the low-flow end of its hydraulic curve.

Self-Priming Jet Design

The pump can draw from below its installation level where suction conditions and pipework remain within the manufacturer's requirements.

Run-Dry Protection

The electronic controller protects the pump against continued operation when usable water supply is lost.

Automatic Restart

The controller is designed to restart automatically after qualifying water-loss or power-loss conditions.

Corrosion-Resistant Construction

White International identifies corrosion-resistant pump body, diffuser and impeller construction as part of the current INOX range.

What Can the Bianco INOX45CORE Be Used For?

The INOX45CORE is best suited to smaller clean-water pressure applications rather than large multi-outlet household demand.

Rainwater Tank Supply

The pump can provide automatic pressure from a suitable rainwater or clean-water storage tank where the suction line is correctly designed.

Garden Watering

The 0.45kW platform is particularly well suited to garden taps, hoses and lighter irrigation applications.

Light Household Supply

It can suit smaller residential pressure duties where the required flow and pressure remain within the pump's hydraulic capability.

PRODUCT SUITABILITY

Is the Bianco INOX45CORE Right for My Property?

A Good Choice If...

You need a compact conventional pressure pump for garden watering, tank water or light household demand.

Compare the INOX60 If...

You have greater simultaneous demand or need more flow and pressure than the INOX45CORE can comfortably provide.

JR Should Check First If...

You have a long suction line, significant vertical lift, undersized pipework, poor source flow, direct mains boosting or several simultaneous outlets.

How Many Taps Can the Bianco INOX45CORE Supply?

The latest White International Australian product guide positions the INOX45CORE at approximately 1–2 taps, calculated at 10 litres per minute per tap at 2.5 bar.

Older White International material previously listed the INOX45S2NXT at up to approximately five taps, while JR's current live page presently lists approximately three simultaneous taps.

The current 2026 manufacturer/distributor guide is the safer specification to use because it applies a stated pressure condition to the tap-count calculation.

Actual performance still depends on fixture flow rates, elevation, pipe diameter, suction conditions and the pressure required at each outlet.

For that reason, the pump should be selected from the required hydraulic duty rather than tap count alone.

Maximum Flow vs Maximum Pressure

The INOX45CORE has a maximum flow of approximately 58 L/min and a maximum head of approximately 40 metres.

These figures do not occur at the same operating point.

Maximum head occurs at very low or zero flow. As flow demand increases, available pressure decreases.

Forty metres of water head equates to approximately 392kPa of static pressure.

The pump should therefore not be represented as supplying 58 L/min while simultaneously maintaining 392kPa.

Self-Priming Suction Capability

White International's current October 2026 guide describes the INOX CORE range as self priming with suction capability up to approximately 6 metres.

This represents a change from older product material, which previously referred to suction capability up to approximately 8 metres.

The current 6m manufacturer figure should therefore be used for new product copy.

Real-world suction performance still depends heavily on vertical lift, horizontal pipe length, pipe diameter, fittings, foot valves and whether the suction line remains completely airtight.

A maximum suction figure should never be treated as a recommended pipe-run length.

Electronic Pump Controller

The current INOX45CORE package includes a pre-wired electronic pump controller.

2.2 Bar Start Pressure

The controller uses a default starting pressure of approximately 2.2 bar / 220kPa.

User Adjustable

White International's current guide confirms the start pressure can be adjusted.

Automatic Start & Stop

The controller starts the pump as water demand begins and stops the pump when demand ends.

Run-Dry Protection

The controller protects against continued pump operation when usable water supply is lost.

Automatic Restart

The system is designed to restart automatically after relevant power-loss or water-loss conditions.

Built-In Check Valve

White International identifies an in-built check valve to help prevent water flowing backwards through the pump.

Pressure Tank Recommendation

White International's current 2026 product guide specifically states that a pressure tank is recommended with the INOX CORE range.

A pressure tank can help reduce unnecessary pump cycling during very small water draws and can improve the overall behaviour of a fixed-speed pressure system.

Whether a separate pressure tank is required or beneficial in a particular installation depends on the final hydraulic setup and expected usage pattern.

JR can assess this as part of the installation rather than assuming every replacement should be configured identically.

Bianco INOX45CORE Specifications

Brand Bianco Pumpz
Current Model BIA-INOX45CORE
Previous Model Naming BIA-INOX45S2NXT
Australian Order Code 808393
Product Type Self-priming stainless-steel surface pressure system
Pump Power 0.45kW / 450W
Electrical Supply 230V single phase
Pump Current Approx. 3.5A
Maximum Flow 58 L/min
Maximum Head 40m
Maximum Static Pressure Equivalent Approx. 392kPa
Current Suction Capability Up to approx. 6m under suitable conditions
Inlet Connection 1" BSP female
Outlet Connection 1" BSP male
Start Pressure 2.2 bar / 220kPa
Start Pressure Adjustment Yes
Automatic Start / Stop Yes
Automatic Restart Yes
Run-Dry Protection Yes
Built-In Check Valve Yes
Motor Type Single-phase TEFC
Thermal Protection Built-in auto-reset thermal overload
Liquid Temperature Range 0°C to 35°C
Maximum Ambient Temperature 40°C
Current Distributor Tap Guide Approx. 1–2 taps at 10 L/min each @ 2.5 bar
JR Current Live Tap Guide Up to approx. 3 simultaneous taps
Pressure Tank Recommended by White International
Wi-Fi No
Variable Speed No
Approx. Pump Dimensions 337L × 180W × 181.5H mm
Current Australian Warranty 24 months

Current October 2026 White International documentation uses the model name BIA-INOX45CORE. JR's live listing still uses INOX45S2NXT. The Australian order code 808393 and 0.45kW / 58 L/min / 40m hydraulic platform remain the consistent identifiers across both generations.

Run-Dry and Thermal Protection

The current INOX45CORE provides two different types of pump protection.

The electronic controller provides run-dry protection when usable water supply is lost.

The pump motor itself uses a built-in auto-reset thermal overload intended to protect the motor against damaging overheating or overload conditions.

These features improve protection but do not replace correct pipework, adequate source-water supply, proper priming and suitable installation conditions.

Tank Water, Suction Source or Pressure Boosting

Tank-Water Supply

The INOX45CORE can provide automatic pressure from a suitable rainwater or clean-water tank.

Suction Applications

The self-priming design allows the pump to draw from below pump level where the vertical lift and inlet plumbing remain within the current 6m suction specification.

Pressure Boosting

The system can boost suitable clean-water supplies where the source provides sufficient flow and the installation complies with applicable requirements.

A pump can increase water pressure, but it cannot create additional source flow if the supply itself cannot provide enough water.

Bianco INOX45CORE vs INOX60CORE vs INOX90CORE

Specification INOX45CORE INOX60CORE INOX90CORE
Power 0.45kW 0.60kW 0.75kW
Maximum Flow 58 L/min 62 L/min 78 L/min
Maximum Head 40m 45m 50m
Pump Current 3.5A 4A 6A
Current Tap Guide 1–2 taps 2–3 taps 5–6 taps
Main Positioning Garden / light domestic use Small to medium domestic use Higher domestic demand

The INOX45CORE is therefore the lightest current model in the INOX CORE range and is best selected where the property's actual demand matches that lower hydraulic duty.

INSTALLATION REQUIREMENTS

What Is Required to Install the Bianco INOX45CORE?

Suitable clean-water source
Correct suction-pipe sizing
Airtight suction plumbing where drawing from below pump level
Suitable delivery pipework
1" inlet and outlet connection planning
Correct isolation valves
Non-return or backflow protection where required
Suitable 230–240V single-phase electrical supply
Stable surface-mounted pump location
Weather protection appropriate to the installation
Pump correctly primed before commissioning
Controller start pressure configured for the property

Pipe Sizing Matters

The INOX45CORE uses 1-inch inlet and outlet connections, but the surrounding pipework still needs to support the required flow.

Restrictive suction plumbing can reduce flow, make priming more difficult and increase the risk of poor pump operation.

Long delivery runs, undersized pipework, restrictive fittings and elevation also consume some of the pump's available head.

Installing a larger pump will not fully correct fundamentally restrictive plumbing.

JR therefore checks the water source and surrounding pipework as part of pump selection and installation.

What's Included With Bianco INOX45CORE Installation?

Standard Replacement

Where the property qualifies for the selected JR package, installation can include supply of the current Bianco pump and controller package, removal of the old pump where included and connection to suitable existing services.

Controller Setup & Commissioning

The pump is primed where required, controller operation is checked, pressure performance is tested and the system is commissioned for normal use.

Possible Additional Work

Suction-pipe alterations, delivery pipework changes, valves, pressure tank installation, backflow protection, electrical adjustments or mounting improvements can increase installation scope.

How Much Does Bianco INOX45CORE Installation Cost?

Current supplied-and-installed pricing is shown through JR's live product and installation selector above.

The final Bianco INOX45CORE installation cost depends on whether the job is a straightforward like-for-like replacement or requires changes to suction plumbing, delivery pipework, valves, electrical supply, pressure tank arrangement, mounting or backflow protection.

A direct replacement using suitable existing services is generally simpler than a completely new suction installation drawing from a remote or lower water source.

JR's current live store still lists the pump under the INOX45S2NXT name, so the live product listing should remain linked to the established JR SKU until that catalogue naming is updated.

BRISBANE INSTALLATION

Bianco INOX45CORE Installation Brisbane

JR Gas & Water supplies and installs the Bianco INOX45CORE in Brisbane for suitable rainwater-tank, garden and lighter domestic pressure applications.

The 0.45kW platform is the smallest current INOX CORE model and is best suited where household demand does not justify stepping up to the larger INOX60CORE or INOX90CORE.

JR checks the water source, suction conditions, pipe sizing, available source flow, expected demand and pressure requirements before confirming the installation.

Eligible service coverage extends across Greater Brisbane and surrounding areas including Logan, Ipswich, Redlands and Moreton Bay.

GOLD COAST INSTALLATION

Bianco INOX45CORE Installation Gold Coast

JR Gas & Water also supplies and installs the Bianco INOX45CORE on the Gold Coast across eligible service areas.

The compact 0.45kW jet-pump system can suit garden, rainwater and light household pressure duties where a larger domestic pressure pump is unnecessary.

JR assesses the source water, suction layout, pipework, electrical supply and required pressure before commissioning the system.

This helps ensure the pump is selected for the actual property rather than from maximum litres-per-minute figures alone.

Can the Bianco INOX45CORE Replace My Existing Pump?

Replacing an INOX45S2NXT

This is the most natural replacement pathway because the current INOX45CORE continues the same 808393 hydraulic platform.

Replacing Another Small Jet Pump

Often possible where the existing suction and delivery pipework are suitable for the 58 L/min / 40m pump duty.

New Rainwater Tank Supply

Requires correctly sized airtight suction plumbing, suitable electrical supply, isolation and correct priming.

Replacing a Larger Pump

The INOX45CORE should only replace a larger pressure pump where the property's actual flow demand confirms that the smaller system is sufficient.

Higher-Demand Upgrade

Where more simultaneous flow is required, the INOX60CORE or INOX90CORE should be compared.

Variable-Speed Upgrade

Customers prioritising quieter operation and more constant pressure can compare an inverter-driven system such as the DAB E.sybox Mini3.

COMMON QUESTIONS

Bianco INOX45CORE Installation FAQs

Is the INOX45S2NXT now called INOX45CORE?

Yes. White International's current October 2026 Australian product guide lists order code 808393 as BIA-INOX45CORE. Older material and JR's current live listing still use INOX45S2NXT.

What is the Australian order code?

The current order code is 808393.

How much water can the INOX45CORE pump?

White International publishes a maximum flow of approximately 58 L/min.

What is the maximum head?

The current specification publishes approximately 40 metres maximum head.

What pressure is 40m of head?

Forty metres of water head is approximately 392kPa.

Does it deliver 58 L/min at 392kPa?

No. Maximum flow and maximum head occur at different operating points. Available pressure falls as flow increases.

How powerful is the pump?

The INOX45CORE uses a 0.45kW / 450W pump.

How much current does it draw?

White International's current 2026 guide publishes approximately 3.5A.

What power supply does it require?

The current product guide specifies approximately 230V single-phase power.

What size pipe connections does it use?

The pump uses a 1-inch BSP female inlet and 1-inch BSP male outlet.

How far can the INOX45CORE suction lift?

White International's current October 2026 guide publishes suction capability up to approximately 6 metres under suitable conditions.

Why do older specifications say 8 metres?

Older INOX45S2NXT literature referred to up to 8m suction capability. The current 2026 Australian guide now states 6m, so the current figure should be used.

What is the controller start pressure?

The controller uses a default start pressure of approximately 2.2 bar / 220kPa, with adjustment available.

Does it have dry-run protection?

Yes. The current controller includes run-dry protection.

Does it automatically restart?

Yes. White International identifies automatic restarting after qualifying power-loss or water-loss conditions.

Does it have thermal overload protection?

Yes. The current product guide specifies a single-phase TEFC motor with built-in auto-reset thermal overload protection.

Does it have a check valve?

Yes. White International identifies an in-built controller check valve intended to prevent backflow through the pump.

Is a pressure tank recommended?

Yes. White International's current product guide specifically states that a pressure tank is recommended.

What water temperature can it pump?

The current published liquid-temperature range is approximately 0°C to 35°C.

What is the maximum ambient temperature?

The current guide publishes approximately 40°C maximum ambient temperature.

How many taps can it supply?

White International's latest guide positions it at approximately 1–2 taps at 10 L/min each and 2.5 bar. JR's live page currently lists three simultaneous taps. Actual suitability depends on the hydraulic conditions.

Is the INOX45CORE variable speed?

No. It is a fixed-speed jet pump with an automatic electronic pressure controller.

Does it have Wi-Fi?

No. JR's current live product identifies no Wi-Fi control for this model.

What warranty does the INOX45CORE have?

The current Australian Bianco pressure-system range carries a 24-month / 2-year product warranty.

Can JR install the Bianco INOX45CORE in Brisbane or the Gold Coast?

Yes. JR installs suitable water-pressure pump systems across eligible Brisbane, Gold Coast and surrounding South East Queensland service areas.

Bianco INOX45CORE Warranty

Australian Product Warranty

The current Australian Bianco domestic pressure-system range carries a 24-month product warranty.

Pump & Controller Package

The electronic controller forms part of the complete pressure-system package and remains subject to the applicable Australian product warranty terms.

Correct Installation Matters

Suitable clean water, correct priming, appropriate suction conditions, electrical supply and compliant pipework remain important to long-term pump reliability.

Manufacturer/distributor product warranty and JR installation warranty are separate. Use the warranty documentation supplied with the actual product when determining manufacturer coverage.

Claims Strengthened or Cleaned Up From the Existing INOX45S2NXT Copy

Updated current model name to BIA-INOX45CORE
Preserved previous INOX45S2NXT naming for JR catalogue continuity
Confirmed Australian order code 808393
Confirmed 0.45kW pump output
Confirmed 58 L/min maximum flow
Confirmed 40m maximum head
Added approximately 392kPa static pressure equivalent
Added current 3.5A specification
Updated supply voltage to current 230V product-guide specification
Added 1" BSP female inlet and male outlet
Updated suction capability from older 8m wording to current 6m specification
Corrected current tap guide to 1–2 taps at 10 L/min each @ 2.5 bar
Separated JR's three-tap live-site guide from current distributor sizing
Added 2.2 bar adjustable start pressure
Confirmed run-dry protection
Confirmed automatic restart
Added built-in check valve
Added auto-reset thermal overload protection
Added current 0–35°C liquid-temperature range
Added 40°C maximum ambient temperature
Added manufacturer recommendation for a pressure tank
Removed unsupported over-pressure-protection claim
Removed unsupported real-time-pressure-display claim from the core product description
Removed generic claims that cheaper pumps are inherently unreliable

Why Choose JR Gas & Water for Bianco Pump Installation?

JR Gas & Water supplies and installs domestic water-pressure pumps across Brisbane, the Gold Coast and eligible surrounding South East Queensland service areas.

The correct pump depends on more than maximum flow or motor power. Water source, suction lift, pipe diameter, delivery pipework, elevation, simultaneous demand and required fixture pressure all influence the final result.

JR assesses the existing setup and property requirements before confirming whether the INOX45CORE, INOX60CORE, INOX90CORE or another pressure-pump arrangement is the better fit.

COMPARE YOUR OPTIONS

Compare Water Pumps

Water Pumps

Compare JR's current tank-water, rainwater, mains-pressure and variable-speed pressure-pump systems.

READY TO INSTALL

Install the Bianco INOX45CORE With JR Gas & Water

The Bianco INOX45CORE 0.45kW combines a 58 L/min maximum-flow self-priming jet pump with automatic pressure control, adjustable 2.2 bar starting pressure, run-dry protection, automatic restart and built-in motor thermal protection.

Its strongest fit is gardens, smaller rainwater systems and lighter household pressure applications where the larger INOX60CORE or INOX90CORE would provide unnecessary capacity.

JR Gas & Water supplies and installs suitable Bianco INOX45 systems across eligible Brisbane and Gold Coast service areas. Choose the applicable live installation package above, or use JR's quote pathway where the job involves difficult suction conditions, direct mains boosting, substantial pipework changes, electrical alterations or a non-standard water source.

This site is protected by hCaptcha and the hCaptcha Privacy Policy and Terms of Service apply.